Response to FAA request for comment contained in-
"Notification for Airborne Wind Energy Systems" 
Attn, Dennis E. Roberts,
Director of Airspace Services for the FAA
[RE: FR Doc. 2011-31430 Filed 12-6-11; 8:45 am]
------------------
Tethered-Aviation Concept-of-Operations (TACO)
Case Focus- Airborne Wind Energy Systems (AWES)
V.1.0 Feb 2012
David Santos Gorena-Guinn and Joe Faust
KLG US Affilates
AWEIA Advisory Reps
Acronyms
AC Advisory Circular (FAA)
AIM Aeronautical Information Manual
AKA American Kiters Association
AOPA Airplane Owners & Pilots Association
ALPA AirLine Pilots Association
AMA American Modelers Association
ARPA-E Advanced Research Projects Agency-Energy (DOE)
ATC Air Traffic Control
AWE AirborneWindEnergy
AWEC Airborne Wind Energy Consortium
AWES Airborne Wind Energy System
AWEIA Airborne Wind Energy Industry Association
AWEA American Wind Energy Association
AWT Airborne Wind Turbine
CAT Clear Air Turbulence
ConOps Concept of Operations
DOE Department Of Energy
DF Drachen Foundation
EAA Experimental Aircraft Association
ECD Extreme Coherent (wind speed and wind) Direction
E-Flight Electric Flight
ESD Electro Static Discharge
ETOPS Extended Operations
EndurOps Endurance Operations
FF FreeFlight XC
FAA US Federal AviationAdministration
FAI Fédération Aéronautique Internationale
FARs Federal Aviation Regulations (USA)
FBO Fixed Base Operator (small airport admin)
FEG Flying Electrical Generator
FSDO Flight Standards District Office (FAA)
HAWP HighAltitudeWindPower
ICAO International Civil Aviation Organization
KLG KiteLab Group (cooperative R&D affiliates)
LSA Light Sport Aviation (Aircraft Category)
LLJ LowLevel Jet (meteorological jet stream)
METAR METeorological Aviation Reporting (data format)
NAS National Air Space
NASA National Aeronautics & Space Agency
NextGen Next Generation (FAA/NASA future NAS standards)
NOTAM Notice(s)To AirMen
NEC National Electrical Code
NFPA National Fire Protection Association (codes)
NIMBY Not In My Back Yard (resident stakeholder)
NREL National Renewable Energy Laboratory (DOE)
PIC Pilot In Command
PIREP Pilot Report(s)
PIC Pilot In Command
RAD Rapid AWE Development
RAT Ram Air Turbine
R&D Research & Development
SARPs ICAO Standards & Recommended Practices
SCADA Supervisory Control & Data Acquisition
SDO Super Density Operations (NextGen)
SMS Safety Management System (FAA)
SSA Soaring Society of America
sUAS small UAS 
TA Tethered Aviation
TACO Tethered Aviation ConOps
TRL Technology Readiness Level (DOE TRL 1-9 Standard)
UAS Unmanned Aircraft System
UAV Unmanned Aerial Vehicle
USHPGA United States Hang @ ParaGlidingAssociation
USPA United States Parachuting Association 
VO Visual Observer
VTOL Vertical Landing & TakeOff (capability)
WKM World Kite Museum
WSIKF Washington State International Kite Festival
XC Cross Country Flight
Preface to this Draft
In 2010 FAA and NASA staffers informally called on the early AWES industry 
to define its new "energy aircraft" types into the FAA's Category/Class system 
and develop a ConOps for AWES in US NAS. In response, AWEIA undertook 
this document, TACO, to formally address these requirements. AWEIA is an early
Volunteer Association, and does not represent all points of view in AWE R&D 
circles. TACO represents a pilot-centric proactive cooperative approach to AWE 
regulation. It is the result of a two-year public process, with working drafts 
shared online (AWES Forum). Over a dozen AWES R&D teams and many individual 
experts, from all over the world, provided key input.
TACO aims toward a consensus FAA Advisory Circular, and ICAO Proposal-For-Action, 
informing aviation stakeholders about AWE issues and operations. TACO covers 
the full scope of TA, not just AWES, applying existing standards wherever 
possible, and is intended to merge smoothly into the NextGen Airspace ConOps. 
This is an open living document; AWEIA USA chapter member, KiteLab Group, builds 
and maintains it on a volunteer basis. 
TACO 1.0 is very imperfect. Double-checking and full cross-referencing is a 
priority of revised editions. Thank You for patience with this initial version.
Corrections, additions, and comments invited: santos137@yahoo.com
CONTENTS
Executive Overview
FAA Temporary Limitations on AWES
FAA Requested Input (Summary)
Aviation Self-Regulation
  "No Shortcuts" Principle
  AWE Aviation Stakeholders
Applicable and Potential AWES FARs
  Parts 101 and 77
  Aircraft Category, Class, and Type
  Pilot Categories, Ratings, and Training
  TA Operational Categories/Classes
  Special TA and AWES Classifications
Hazards and Safety
  Characteristic Hazards
  Conspicuity
  Weather
  Special Safety Methods
  Engineering Challenges
  SMS
AWES Operations
  General
  Special 
  Case- FBOs
  Offshore
AWE Economic Aspects
  Industry Growth
  Energy Excise Taxes
  Jobs
AWES Environmental Impacts
  NIMBY- Noise, Visual Impact
  Wildlife
  Land Use
  Case Analysis- Land and Airspace Sprawl
US Federal Policy Issues
  Global Leadership
  Rules Enforcement
  Case- "K-Prize"
NextGen Integration
AWES Documentation and Inspections
  ACs, AIM
  Certificates
  Production

Executive Overview
TA can be defined as the aeronautical practices used to transfer force over 
distance via cables between aircraft, payloads, surface anchors or vehicles. 
Well-known instances include kites, aerotowing, and aerostats (moored balloons). 
New tethered flight concepts are expanding aviation capabilities, creating 
new applications, jobs, industries and novel recreations. TA even promises to 
generate abundant wind energy, as AWE, also known as "Kite Energy". The FAA 
has announced a provisional new aircraft category of AWES, to designate the  
rapidly evolving energy aircraft. 
An AWE clean energy industry has potential to subsidize, by airspace usage fees 
and energy excise taxes, the needs and dreams of populations and aviation. Key
stakeholders, such as pilots, developers, regulatory bodies, and government, are 
working together to resolve technical and social challenges. The current aviation 
regulatory framework is not broken, but daily protects public safety at reasonable 
cost, and is a sound foundation to build on. 
Pilots are primary workers in airspace most exposed to flight risk, and the FAA 
itself is pilot-led. The standing FAA requirement for direct pilot supervision of 
UAS systems will hold for years yet. This ConOps is thus "pilot-centric", 
embracing the pilot as a key stakeholder, Upholding aviation norms and traditions. 
TACO is also forward-looking to eventual validated autonomous flight. 
Pilots already lead in R&D of safe effective TA. They will faithfully ensure future 
safe of AWES operations in shared airspace. New pilots will be needed to fill the 
many flying jobs created. 
The aerospace industry will develop large-scale systems that pilots accept and 
FAA inspectors certify as airworthy. Aviation and energy policy developers and 
decision makers are a key group to properly inform. Knowledgeable stakeholders must 
strive to honestly convince extended stakeholders (populations) that TA enhances 
society as a "good neighbor". TACO best-practice standards lay the basis for wide 
public acceptance.
FAA Temporary Limitations on AWES
In its Notification for Airborne Wind Energy Systems (AWES) the FAA announced a 
change in policy to allow for the continued development of AWES technology and to 
provide the FAA with data regarding these devices so that the safety and integrity 
of the NAS is maintained. The Agency invited comments from airborne wind energy 
system developers and the public toward revised policies in application of Title 14 
CFR, part 77, with regard to AWES to allow the FAA to comprehensively analyze AWES 
integration into the NAS. The FAA determined that AWES is a unique relatively new 
technology supporting clean, renewable energy initiatives, and that part 101 does 
not currently contain the necessary provisions to address these systems.
The FAA found that whether designed with conventional 14 CFR part 101 type devices 
or non-conventional hybrid-type components, each AWES reviewed possessed differing 
attributes. These attributes included physical design, operation, airspace utilization, 
radar impact, etc.. The FAA is concerned with these differing attributes and their 
unknown impacts to the NAS, navigable airspace, and to the flying public. Therefore, 
the FAA concluded that each early AWES deployment needed study on a case-by-case 
basis, to ensure existing aviation safety.
The FAA concluded that AWES should be studied, and potential impacts to navigable 
airspace identified and addressed. The FAA proposed application of existing FARs 
that outline standards determining obstructions to air navigation or navigational 
aids or facilities (see 14 CFR part 77). 14 CFR part 77 is also utilized to 
evaluate the impact of wind turbines and other forms of renewable energy on 
navigable airspace. The FAA concluded that new forms of wind gathering devices will 
be regulated under the Obstruction Evaluation Process, as administered under 
14 CFR part 77. Part 77 thus applies to current AWES projects used for R&D 
purposes. The FAA found that the key provisions of 14 CFR part 77 are applicable 
to AWES without need to amend the regulations. Permanent and operational (TRL9) AWES 
regulation be addressed as further evaluations and risk assessments are performed. 
Pending further review, AWES developers and operators were requested to limit 
temporary operations to the following:
[KLG AWES "Reference Model" comments in brackets]
(1) Airborne operations of AWES should be temporary in nature for testing and data 
collection purposes only;
[Provision is requested for building flight hours in reliability testing. Remote 
operations with no shared air-use or population factors are proposed.]
(2) Single AWES devices only (e.g. no “farms or multiple simultaneous testing);
[The FAA is asked 1) to allow KLG affiliates 1/4 scale experiments of array formations. 
1/4 scale is defined here as limited to 500ft AGL, with no single sail or tether element 
to exceed 5lbs or be allowed to constitute a dropped-object hazard; And 2) to allow 
side-by-side testing of scale prototypes as a basic scientific method, as long as both 
units together due not constitute more of a hazard (by weight, power, and/or airspace 
usage) than the largest allowable single unit.]
(3) AWES should be limited to a single fixed location (no mobile ground facilities);
[Many AWES in testing involve on-site mobility features. This guideline is interpreted 
to intend that current experimental testing only occur in fixed locations, even if the 
hardware has wheels for mobility.]
(4) Testing is confined to heights at or below 499 feet above ground level (AGL);
[This is a reasonable initial limitation. A few session exceptions may be requested, 
and reasonable Full-Scale expansion path, along a 5 year timeframe. The 2000 ft 
obstruction regulatory ceiling looks airworthiness-validatable in this timeframe.]
(5) Airborne flight testing of AWES will only occur during daylight hours; and
[Some amount of night operational testing of safety lighting and investigation of night 
winds (inversions and LLJs) is required by the critical-path to TRL9.]
(6) AWES will be made conspicuous to the flying public. (The sponsor of the AWES will 
provide the FAA with their marking and lighting scheme. FAA Advisory Circular 
70/7460-1K (AC 70/7460-1K), Obstruction Marking and Lighting, currently does not 
address AWES, but may be used as a guide, as some portions may be applicable.)
[Markings will conform to or exceed the AC standard. Units will be FAA Orange and 
White, with FAA Red or flashing White night lighting]
[Additional KLG Voluntary Standard- Sense and Avoid capability by a PIC (and or VO)]
FAA Requested Input (Summary) 
The FAA is working jointly with industry, the Department 
of Energy, as well as other airspace stakeholders, and believes that additional
information from AWES developers would be beneficial. The information will assist the 
FAA as it considers long-term policies and guidance to integrate the AWES safely into 
the NAS.
The FAA stated several concerns regarding AWES operations
in the NAS, including [comments]:
(1) Impact(s) to various surveillance systems (radars);
[AWES impacts to airspace radar are manageable by suitable designs and materials. 
An AWES can be naturally radar transparent (dielectric fabric and lines) and host 
any desired reflector or transponder in a stable position.]
(2) Conspicuity to aircraft (marking and lighting);
[KLG Large-Surfaced slow-moving AWES will have high inherent conspicuity. ANy fast 
moving parts of the AWES will be fully contained within the large-surface Conspicuity]
(3) Overall safety, safety to other airspace users, safety to persons and property on 
the ground, safety to the efficient and effective use of NAS facilities, safety to 
airports, safety to air commerce, and safety to the efficient operations and 
managing of the NAS;
[KLG concepts especially limit mass (and density) and velocity, and employ triple 
redundancy in all critical functions.]
(4) AWES fly-away protection (mooring cable is severed);
[Inherent flying capability, redundant tethers, "kite-killers", tether cutaway, 
programmed landing on site, alternate field landing, ballistic parachutes,
first-responder intervention.]
(5) AWES physical dimensions per unit and per farm;
[KLG Full-Scale Spec limits Soft wings of about 100sq m and rigid wings of about 30sq m, 
based on current TRL8 kites.]
(6) AWES operating dimensions per unit and per farm (amt. of airspace it may require);
[A KLG scale kite farm is defined as 500ft high by 1000ft diameter. A standard early 
utility scale kite farm in round numbers- 2000ft high by 4000ft diameter]
(7) AWES mobility (potential for AWES to relocate from physical ground location to a
different ground location); and
[AWES Units and Arrays are in principle capable of ferrying themselves to working 
locations and maintenance and inspection centers.]
(8) Wake turbulence or vortices of wind capturing component(s).
[This issue mainly applies to large high-velocity AWES aircraft, with interference 
potential inversely proportional to unit spacing. Pilot awareness of the effect, 
downwind in proximity to AWES operations, is likely sufficient precaution.]
The FAA recognizes various design concepts utilized by AWES developers for components 
of their overall AWES. These may include the components that keep the system 
aloft, the power generating equipment, the energy transferring equipment, the 
maneuvering controls, and the physical and operational dimensions, amongst others. 
Given these variations in technologies, the FAA seeks information from the industry to 
help evaluate the potential risks of permanent AWES and AWES farms operating in the 
NAS.
[TACO1.0 documents the current AWES state-of-the-art, to assist FAA evaluation.]
The FAA requests AWES sponsors provide information on the following by February 6, 
2012. Additional information to be requested as needed.
(1) General information on a developer's specific AWES design concept and plans for 
operation.
[KLG tests all concepts comparatively at small scale, but is known for forward-looking 
Megascale AWES schemes. Broad exploration of Dense-Array kite farm Concepts and 
Operations is ongoing at 1/4 scale. Occasional specialized experiments will be conducted 
to the closest applicable standards.]
(2) What type(s) of mechanical devices are you employing to keep the system aloft?
[Ordinary Hobbyist Lifter and Power Kites, Winched and Towed Launch, Multiple Ground Winch 
Phased Tugging]
(3)What are the physical dimensions of the device(s) with relation to the above?
[Current 1/4 Scale Testing devices are Human-Scale. Full-Scale AWES will be Industrial-Scale, 
for example, ground winches and generators of about 8 cu yds in size, or more.]
(4) What kind of materials will comprise this device?
[Aloft, only polymer cables and fabric are essential; at the surface, civil engineered 
Earth Anchors and conventional power equipment (Winches and vehicles.]
(5) What are the operational dimensions (requirement for airspace) for the
system?
[Current experiments are at 1/4 Scale- 500ft high by 1000ft diameter. Full Scale 
operation at 2000ft high by 4000ft diameter will follow in a few years, based as 
engineering milestones are met.]
(6) Is there a requirement to operate more than one device in the air?
[No. It is proposed that historic integrated kite stacks, trains, arches, and variants, 
[WKM, DF], be classed or typed as one device provided 1) they are comprised of many small 
crosslinked units working as one composite device, 2) the entire array device is flown 
as a single piloted aircraft, and 3) that aggregate gross weight of the array device, 
rather than the number of integrated sub-units, be the key regulatory metric.]
(7) What are your long-term plans for this system?
[KLG intends cooperative R&D evolution to gigawatt scale energy production under all 
applicable regulatory standards.]
(8) Can you comply with marking and lighting requirements?
[Yes.]
(9) Can you identify any impacts to your system when complying with current guidance 
for marking and lighting standards?
[Impact of Conspicuity compliance is minimal for KLG designs.]
(10) What are your plans or how is your system designed to make the system 
conspicuous to the flying public?
[The Dense Array Concept has the highest inherent conspicuity. FAA conspicuity 
standards are exceeded. Local aviation coordination would also be standard.]
(11) Safety to other airspace users and persons and property on
the ground.
[Sense and Avoid would be practiced by a PIC and/or VO. The arrays will "kill" and 
float down at about out of the way of a wandering aircraft. Low mass, low velocity 
flight units of fabric and cable are the least inherently hazardous of all AWES 
classes.]
(12) What safety mechanisms or devices have you designed into the system to ensure 
all aspects of aviation safety?
[KLG embraces the SMS approach, and designs in inherent-safety features from the start-
Low-Mass, Low-Velocity, Passive Flight Stability, redundant structure, double redundant 
manual and semi-automatic failsafe devices (Kite-Killers, Furling), PIC/VO supervision 
standard, etc. KLG designs for minimum inherent-risk to other airspace users, and 
persons and property on the ground.]
(13) What safety mechanisms or devices have you designed into the system to minimize 
or mitigate hazards to persons or property on the ground?
(14) What are your plans or how is your system designed to reduce a large radar 
cross-section and become less conspicuous to surveillance systems?
[KLG's polymer-line-and-fabric Main Specification is inherently radar transparent.]
(15) What are your plans or how is your system designed to reduce impacts to any 
communication or navigation systems supporting the NAS?
[KLG AWES designs are aviation need-driven. Conspicuity is maximal, radar concern minimal, 
and the Sense and Avoid principle is applied by a PIC and VO. As a problem is discovered, 
the on-site operator undertakes to remove it. The KIS "rag and string" approach promises 
the least impact on legacy or future comm and NAV systems.]
-------------------------------
In addition, the FAA requested input from airspace users regarding the impact
AWES would have on the NAS. They requested airspace users provide comments to 
the following points. Additional information may be requested upon further 
contact and coordination.
* What safety implications do you foresee of AWES operations with respect to your 
use of the airspace or your interest to the NAS?
[AWES must mitigate any adverse safety impact to maintain general standards.] 
* Would you have any concerns about AWES permanently operating at altitudes above 
500 feet AGL, but, under 1,999 feet AGL? If so, what and why?
[Conspicuity and proximity to high air traffic activity are key concerns.]
* If AWES were permitted to permanently operate in altitudes at or above 2,000 feet 
AGL, how do you foresee this as negatively impacting your missions, use of the 
airspace, or other interests in the NAS?
[It will essential be to evaluate impacts over time, restricting or 
allowing AWES according to comprehensive assessments.]
* What other concerns and/or issues might you have with respect to AWES co-existing 
in the NAS?
[Safety Reporting by AWES developers must begin, including Mishap Reports and Hazard 
Warnings.]
[AWES should not encroach on the Airspace Commons without equitable mitigation 
of undesired impacts. AWES implementation is not currently favored in congested 
airspace. NextGen SDO capabilities will be required for AWES in crowded airspace.]
Conclusions
Following a large build-up in interest and activity the FAA has released 
temporary policies governing experimental AWES operations. AWES R&D community 
discussion has been extensive and consensus standards are being drafted 
on many key issues. The "case-by-case" review process is seen as a 
reasonable standard for early AWES R&D regulation. 
 
The FAA Advisory Circular governing Obstruction Marking and Lighting 
AC 70 7460 1K was accepted as the default standard for AWES conspicuity.
New FAA standards for sUAS operations cover key issues common to AWES. A PIC 
and VO, with sense-and avoid capability are particular priorities to adopt 
as an AWES standard for those systems with high-consequence risk.
Mishap reporting and open Failure-Mode disclosure by developers is 
expressed as an essential community need. Standards for flight parameters, 
such as altitude, conspicuity, VFR conditions are explicitly in force by 
the 2011 FAA circular. Existing airworthiness standards based on aircraft 
mass and velocity are additionally proposed for enforcement by AWEIA, with 
its membership hereby on notice.
Multi-tethers and anchors are proposed as basic safety redundancy, and the 
determination of airworthiness should account for the lack or presence of 
multi-tethers, or equivalent measures, in the AWES design.

Aviation Self-Regulation
The FAA relies on all aviation sectors, via user agencies, associations, and 
industries, to help define, promote, and even enforce best practice of members. 
Safe aviation operations presided over by responsible sector self-government 
allows the FAA to maximize its limited resources and regulate with a light 
touch. Failure of any sector to ensure safety brings down the full weight of 
FAA enforcement.
Accordingly, AWEIA has, as part of its formal mission. a global leadership 
role in consensual self-regulation of AWE and related TA. TACO is AWEIA's 
project to coordinate Consensus Safety Standards and act as industry liason to 
regulators like the FAA and ICAO. AWEIA intends to instill in its members the 
highest safety standards in its field, anticipating and exceeding government 
regulations. AWEIA will petition the FAA for new Rulemaking as needed, 
following the successful example of EAA-FAA cooperation in creating a regulatory 
framework for the new LSA category. AWEIA will work within the ICAO framework 
to develop a core SARPs. There are already urgent R&D safety issues AWEIA is 
addressing, such as obligatory sharing of safety-critical failure modes and 
mishap reports.
No "Short-Cuts" Principle
Newcomers to AWE without a strong aviation background often express concern 
that aviation regulations will stifle development. The reality is that its
developers who are challenged to acculturate to rigorous aviation norms if 
they intend to succeed. There is a niche for every level of safety culture, 
from small harmless wind toys, to complex powerful systems.
No TA/AWES developer should expect or demand systematic exemptions or 
waivers from existing regulatory standards. Exemptions and waivers should 
contingency-reserved for rare situations where no better alternative exists. 
An exception example is emergency approval of an AWES after a disaster [KLG]. 
Aviation Stakeholder Groups
Local governments and populations, where TA operations impact, are key 
stakeholders to proactively include in early planning. They will have a 
strong voice in shaping AWES, with a NIMBY veto power if impacts warrant. 
AWEIA is just one of several aviation associations with overlapping interest 
in TA. AWEIA seeks to reconcile all stakeholder interests [AWEIA Code of 
Ethics]. AWES developers and operators are emerging from diverse aviation 
communities. EAA and AOPA are key pilot stakeholder representation with 
growing interest in the new sector. 
EAA is an international membership organization and a natural incubator 
for innovative aircraft within small aircraft classes, especially LSA 
and categories like E-Flight. EAA feels squeezed from above by expansions 
in Class B Airspace, and now from below by AWES. The EAA suggests the use 
of restricted airspace to validate AWES safety and application of the FAA 
SMS framework [EAA, Federal Docket]
AOPA is a US legacy general aviation organization whose large membership 
takes a keen interest in airspace regulation. AOPA has advised caution in
allowing AWES, but accepts the FAA policy notice. AOPA has identified as 
their critical current concern the conspicuity of an AWES, particularly 
its tether(s). [AOPA, Federal Docket]. 
The AKA represents recreational and professional kiters. Classic kiting is 
a major source of prior TA art. AKA is the public face of the US kiting 
community, with a special role to serve in AWE. Kiting culture is having 
an enormous foundational influence on Kite Energy, with many essential 
techniques already well known within small circles. Past and present AKA 
presidents are excited about AWE, and offer any sort of support required, 
by tapping into its membership network [Gomberg, AKA].
USHPA- Parafoil commonality with Kitesports and Skydiving. Special methods 
suited for AWES application include Step-launch, winch-launch. Decommissioned 
airframes may be repurposed as prototype AWES platforms [Faust].
USPA- Master Parachute Riggers will be the responsible professionals for 
line rigging and soft-kite platforms.
SSA is the enthusiast group closest to high-performance glider derived AWES. 
Case Note- Ampyx is developing glider derived "power planes", and glider 
champion Dale Kramer is planning Free-Flight XC demonstrations.
 
The AMA is responsible for safe hobbyist model aviation. Small AWES systems 
will become popular in the AMA technology space. AMA-FAA safety coordination 
is well developed.
 
Key Wind energy industry standards promoted by AWEA will apply to AWE 
operations. Case Note- Some noted players in the windpower industry are 
involved in AWE R&D, like US WindLabs.
ALPA and aviation carriers are not yet direct stakeholders, as commercial 
aviation employs reserved airspace and will stay well-separated by current 
standards, until NextGen is applied. As large kite farms become operational 
under SCADA-based piloting, the professional pilots involved are likely to 
have ALPA affiliation.
Applicable and Potential AWES FARs
Existing FARs cover most of the engineering and flight standards 
required to properly regulate the new aviation types. The classification 
scheme is a historical patchwork. FARs can seem vague, confused, and 
contradictory, but the system allows for needed wiggle-room, with 
exceptions, exemptions, and options at the discretion of FAA field 
authorities. NextGen FARs will overhaul classification, but quirks 
will surely persist.
Standards, Exceptions, and Exemptions 
These sections propose specific Consensus Standards for regulating TA. Some 
of it is legacy FAA "boiler-plate" in process of being adaptation into an 
Applicable Standard as "an operational manufacturing/design/maintenance/quality 
standard, method, technique, or practice approved by or acceptable to a civil 
aviation authority". An Exception is a case in which a rule, general principle, 
etc., does not apply. There are very few justifiable exceptions to apply to TA. 
An Exemption is approval to be free from current regulations in 14 CFR. Minimal 
need for exemption of TAs from FARs is a TACO priority.
AWES Aircraft Category, Class, and Type 
New Certifications for AWES. 
A logical step toward proper regulation is to finally define tethered wings 
(large kites) as aircraft. Currently only airplanes, rotorcraft, gliders, 
and balloons are formally recognized as Aircraft. A tethered wing anchored 
in wind and/or associated motor-winch can be classed as an Engine, 
rated by power, for motive or output power. Ratings and Operating 
Limitations would be certificated just as reciprocating and rotary IC 
engines are. The notion of an Airframe remains the same, with the tether 
structural interface an added technical concern. Exotic new kinds of 
tethered aircraft will need to be Type Certified in a suitable new Category 
or special Classes.
14 CFR 1.1 defines a kite as a “framework, covered with paper, cloth, 
metal, or other material, intended to be flown at the end of a rope or 
cable, and having as its only support the force of the wind moving past 
its surfaces." Large modern kites are soft structures, without a rigid 
"framework", and any kite can be towed as a second support mode, so the 
definition needs updating, for example-
"A kite is a suitable winged construction intended to be flown from a tether, 
having as its primary support the force of wind moving past its surfaces."
Most of the profusion of potential TA design Types will sort naturally 
into the FAA's Aircraft/Airman/Operations Category, Class, & Type System. 
Categories naturally grow by adding Classes. Special TA Classes, like AWES, 
are proposed to supplement current Categories. A new TA Category might 
emerge and be formally ordered under the LSA model of classes and sets.
Like any other aircraft, TA platforms should be classified by gross-weight 
and airspeed, by mass-velocity physics of safety-critical "consequence". 
Weight and Speed are primary determinants of Class within a Categories. 
In general higher mass/velocity Classes have Higher Consequence 
Failure-Modes requiring proportionally higher standards for equivalent 
safety (Mortality to flight-Hours as the basic metric).  
A TA Class can be widely applied, for example, many given Aircraft Types are 
potentially suitable or routinely modified for aerotowing, with applicable 
standards inherited. 
Single/Multi-Engine Classes- Many TA applications have powered modes that 
naturally assign them to an Engine Class within a Category. The trade-off of 
improved reliability from multi engines is the higher required standard of 
Pilot training & aircraft engineering. 
With respect to Certification of aircraft under the FARs, Class means a 
broad grouping of aircraft having similar characteristics of propulsion, 
flight, or landing. Examples include: airplane; rotorcraft; glider; balloon; 
landplane; and seaplane.
Operational classifications include: normal, utility, acrobatic, commuter, 
transport, special, restricted, IFR, Icing Conditions, etc.
 
Structural airframe systems also fundamentally categorize aircraft. A fabric 
"softwing" has very specific different design and operational parameters 
compared to any high speed rigid wing, but both can be classed as Kites. 
When in doubt, best practice is sought in closely related aviation specialties, 
and regulated to those standards, as a ready default.
New sub-classes are proposed for major new configurations like free-flight and 
cross-linked flying formations. Experimental and rare aircraft types are flexibly 
integrated by ad-hoc classification into multiple categories & classes. Aviation 
is increasingly diverse and major new branches can merit a wholly new Category.
Any conventional aircraft can in principle be put on a tether, which 
does not negate its status as a legal aircraft of a given mass & speed 
envelope, but adding a tether adds operational complexity and hazard.
Provisional Sub-Classes- Tethered-Aerobatic, Tethered-Single-Engine 
(or turbine), Tethered-Multi-Engine (or turbine), Tethered-Normal, Utility, 
Sport, Ultralight, Moored-Balloon, Aero-Towed Glider, Tethered Rotorcraft.
Categories and Classes of aircraft and operations mix, overlap, or otherwise 
interrelate. For example, a specific type can be operated as either a 
Commercial or Private Aircraft, with different FARs in play. A given Type 
might have to conform to multiple classification standards.
Small Aircraft are defined as 12,500 pounds or less, maximum certificated 
takeoff weight. This is a "line-in-the-sand" for developers and regulators, 
as AWES grow larger, with regulatory advantages to staying small.
AWES that operate aerobatically and incur high G-loadings are Acrobatic 
Category (limited to 12,500lbs gross). 
Tether-Weight should be counted toward rated gross weight, as a tether can 
weigh more than the supporting aircraft [SkySails]. Similarly, Tether-Drag 
is a considerable aerodynamic force, and should count against rated L/D. 
Autonomous Flight of high-consequence platforms (high mass &/or 
velocity, especially around populations) require a proportionately more 
cautious rigorous path to validation and certification. AWES Autonomous 
Flight Certification will likely follow FARs standards applied to general 
flight autonomy.
AWES are generally high-duty UAS, meriting special Utility designation and 
Certification. 
According to gross weight, AWES can be sorted into Scale-Model, Ultralight, 
Sport, Normal, Commuter, and Transport Weight and Airspeed Categories. 
Operational altitude is a major classification criteria. Some relevant 
layers- 400ft for low mass low speed hobbyist model aviation. 500ft as a 
"floor" for general VFR aviation. Class G airspace is low altitude and 
variable, with higher ceilings in remote areas, 2000ft obstruction rules, 
18,000ft is the defined ceiling to avoid transport aviation operations. 
25,000ft is the defined threshold of High-Altitude flight, with special 
applicable standards.
Stall Speed is a key aircraft flight parameter, the lower the safer, 
with a wide range of operation desirable between max airspeed and stall 
speed. Fixed-Wing AWES that land at a fixed point face a challenge to 
not operate too close to stall on final approach, or land too hard. Sink 
Rate or Terminal Velocity might be a partial basis for AWES regulatory 
classification.
Pilot Categories, Ratings, and Training 
Pilot training and testing is fundamental to aviation. Conventional 
pilots in AWES-shared airspace need awareness of new operations and 
conditions. Many AWES commercial venture starts lack formal aviation 
backgrounds and face acculturation along FAA approved paths. AWES
pilots must master basic aeronautics, plus specialized knowledge and 
operational proficiency. As high-consequence risk emerges in powerful 
industrial-scale systems, AWES crews must ultimately meet equivalent 
standards of certification to Transport Pilots. See Sec. 61.31 Type 
rating requirements, additional training, and authorization requirements.
 
As used with respect to the certification, ratings, privileges, and 
limitations of airmen, Class means a classification of aircraft within 
a category having similar operating characteristics. Examples include: 
single engine; multiengine; land; water; gyroplane; helicopter; airship; 
and free balloon. New classes of airman are proposed for AWES and TA 
types that do not clearly fall into existing classes. 
Mature TA pilot standards exist within towed gliding (including hang 
gliders and paragliders), banner towing, and many approved niche 
aviation systems.
AWES Flight Crews
sUAS Standards are generally suited to AWES operations. A PIC and VO are 
a minimum crew for a current large AWES. PIC and VO must judge conditions 
and inspect constantly. Round-the-clock watches for EndurOps must meet 
standards for preventing pilot fatigue. A Session Flight Plan can be 
followed that accounts for conditions and forecasts. Safety Training of 
operators must be rigorous and ongoing.
Future kite farm crews may be quite large, with most of the positions 
being handling and maintenance. Flight crews will serve round-the-clock 
in shifts [KLG].
TA Operational Categories/Classes 
Flight operations vary within pilot and aircraft categories. Conditions 
and applications often impose specific critical constraints. Multi-modal 
AWES systems will blend operations of usually discrete models, as 
for example, a glider unmooring from its tow into its free-mode.
Altitude- Obstruction Reg altitude (>2000ft), Class G preferred for AWES.
A kite tether can be considered as an "Engine", enabling wind to be a 
flight-sustaining power. Tether forces might thus be "rated" like engine 
power.
Multi-Tether Systems are comparable to Multi-Engine Aircraft, with 
similar engineering trade-offs. The increase in operational complexity, 
by added redundancy, can actually enhance flight safety, provided the 
pilotage is specially qualified. 
Large- >12500lb, Small- <12500lb, Light, UltraLight- max 
155lb, Model Aviation- max 55lb, Unregulated Toy- max 5lbs 
Acrobatic Class- Aerobatic operation is a feature of some AWES, with 
issues of conspicuity, high cycle structural loadings and fast controls.
Novel TA/AWES Categories, Classes, Sets, and Types
The explosion of new configurations defies final classification, but can 
be described generally.
AWES with Surface Based Electrical Generation
Many AWES schemes minimize mass aloft by keeping electrical generation 
and conductors at the surface. The purest expression of this 
philosophy is "rag and string only", with many identified advantages 
to aviation safety and economics. Ground-based actuators (winches) can 
be massive industrial grade machinery, without the delicate margins of 
flyable servos. Radar clutter, com link dependence, inspectability, high 
mass-velocity, and many other issues are mitigated. There will still be 
enormous challenges to safe operations as mechanical power scales grow.
AWES with Electrical Power Generation Aloft
Electrically Conductive AWES Tethers and generators require added standards 
to address inherent safety issues. A general suggestion is to apply 
terrestrial electrical code and fire safety standards, as a default 
baseline, with special aviation standards overlaid.
E-Flight is a fast progressing new category of general aviation. Tethered 
E-Flight will share many of the existing and pending standards. E-VTOL 
will inherit key standards of existing VTOL.
Case Note: Sky WindPower, Inc, is well regarded for its study of the 
electric quadrocopter AWES concept space. Makani Power, Inc, leads in 
developing large advanced composite autonomous aerobatic E-VTOL 
AWES. The Makani models are useful benchmarks for regulation study, 
with data being generated under a DOE contract.
Autonomous AWES
Autonomous Flight is slowly maturing as a viable aviation option. Many AWES 
teams are working to automate flight operations to avoid human piloting. 
Tethered autonomy has both favorable and adverse aspects. Tether dynamics 
add aeroservoelastic uncertainty. 
Developing flight control software is an exacting slow process. AWES engineers 
must create code to "clean-room" standards and have it formally validated. 
Sensory and situational uncertainty are persistent problems. Exception 
handling is a critical challenge. Decision to relaunch a system after an 
automatic shutdown is a "tough call" to automate. Meanwhile, human piloting 
will rely as necessary on existing avionics, and supervised autopiloting.
SARP is the conceptual paradigm for pilot-supervised automation.
Cellular Aerial Arrays
Formations of TA aircraft joined by tethers into dense-arrays is a major AWES 
configuration class. A goal of dense-array methods is to greatly enhance general 
aviation safety and reliability by avoiding airspace (and land) sprawl for an 
equivalent power capacity. Many functional units can be aggregated to fly as 
one well-integrated flight control process, as opposed to many independently 
(auto)piloted units.
Arrays can incorporate any of the many classes of AWES units. The array can 
constrain units into a high "aggregated stability" whereby the momentary 
instability of any single unit is cancelled by the normal action of neighbors.
High Conspicuity and redundant surface connections are safety advantages, 
but given a large arrays, an unlikely worst-case mishap of a dragging breakaway 
could be catastrophic. The highest professionalism and redundant levels of 
"killability" will be required for these vast flying megastructures.
Case Note: TUDelft and KLD are R&D leaders in the design-space of cross-linked 
formations of AWES units.
High Altitude Kite Flight
Even a century ago, kites reached altitudes in excess of 30,000ft. While current 
art and short-term economics favor low-altitude AWE, a new round of high-altitude 
kite aeronautics is is poised to explore "fuelless aviation" applications even to 
around 100,000ft. These will be demanding experiments conducted by top aerospace 
teams, as approved by the FAA on a case-by-case basis.
Currently, stretching tethers to high altitudes is an unacceptable hazard to 
all classes of aviation in shared airspace. The consequences of breakaway and 
runaway are aggravated. Persistent high Altitude TA must remain in restricted 
airspace and await NextGen capabilities to expand operations.
 
Existing missile ranges are proposed as an ideal venue for high-altitude TA testing, 
on a time-shared basis, as such restricted airspace is not often too intensively 
used for rocketry.
"Free Flight"- Wind Powered Aviation
Free-Flight is a frontier of aviation based on two or more wings tethered together. 
Its been shown with small models that if each wing flies in its own wind, the tether 
stretched across a wind gradient, they can work in opposition and sustain flight in 
any direction. Unlike traditional soaring dependent on thermals or terrain, Free-Flight 
can be sustained ordinary surface wind gradient or any sort of wind shear, like around 
LLJs and inversions. It may be a revolutionary basis for future XC flight.
Case Note: National champion glider pilot and aeroengineer, Dale Kramer, proposes 
a cross country demonstration of Free-Flight by tethering his high performance glider 
to a large kite farther above. By working glider against kite its predicted he can 
fly almost indefinitely without fuel. The FAA traditionally accommodates such unique 
aviation feats that advance aeronautical knowledge on a case-by-case basis, with only 
the highest level of skill and expertise allowed. There will be many unique aeronautical 
feats to attempt along these lines.
Tethered Rotorcraft
Many prototype and proposed tethered rotorcraft are proposed for AWES. Some 
are E-helicopters whose motors also generate, and others are basic autogyros 
modulated to pull against loads, as "Traction Rotors". 
General rotorcraft design and operational factors as currently defined 
will apply to the new rotorcraft, with tether factors added.
Case Notes- Seattle-based SkyMill is an example of a serious AWES Traction Rotor 
developer and has an MOU with Boeing and engineering affiliations with Sikorsky.
SkyWindPower is a large-quadrocopter AWES developer with academic 
roots and a Huntsville-centered aerospace team.
Aerobatic AWES Aircraft
Many AWES concepts propose aerobatic flight to sweep crosswind in kite mode. 
A figure-of-eight pattern is common and ranges from a short non-aerobatic 
"dutch roll" oscillation to full "lazy-eights". Also common is a fully aerobatic 
circular "kite loop" pattern.
Under FAR §91.303 and AC AC 91-48, Aerobatic flight is defined as 
intentional abrupt change in an aircraft’s attitude, abnormal attitude, 
or abnormal acceleration, not necessary for normal flight. Restrictions 
include aerobatic flight over urban areas, outdoor assenblies, Within 
surface areas of Class B, Class C, Class D, or Class E airspace 
designated for an airport; Within 4 nautical miles of a Federal airway; 
Below 1,500ft AGL; or if flight visibility is under 3 statute miles.
Given Part 77's altitude ceiling of 2000ft, and the aerobatic minimum of
1500ft, suggests a default operating zone of 500ft. This may be a desirable 
AWES design constraint to enforce.
AWES in stable flight, with highly constrained sweeping sub-elements, may 
or may not be found aerobatic, on a case-by-case basis, as determined by 
mass-velocity and other safety metrics.
Case Note- Joby Energy has merged under Makani Power and this team is the 
leader in the aerobatic E-VTOL AWES concept-space.
 
Aerostats
The term Aerostat is associated with Moored Balloons, but logically extends 
to persistent tethered electric aircraft or kite flight. Aerostats have 
many applications and usage is likely to increase.
Once common as wartime Barrage Balloons, Moored Balloons are making a 
comeback as radar stations (to 18000AGL) and for low-altitude advertising. 
Many AWES designs employ Moored Balloons for persistence aloft. Moored 
balloon regulations are mature and may represent an early regulatory approval 
path for AWES.
Persistent E-Flight is being shown practical by means of a conductive tether. 
Kites can keep station in calm by towing in circles from vehicles or by phased 
tugs from fixed winch networks. This is a new aerostat class, suited for AWES 
application.
AWE Ferrying Operations
AWES may involve self-powered or towed air ferrying to operational or 
maintenance/inspection locations. Such transport may need special clearances and 
flight planning, akin to moving oversized cargos on roadways, in the case of 
large or far-flung configurations [KLG].
Classic Kite configurations
Traditional kite methods are powerful and instructive. The following traditional 
multi-kite classes can be identified- Stack, Train, and Arch [WKM]. A new class 
is emerging from kiting, dubbed a "Cloud", as a 3D cluster of cross-linked kite 
structure [WKM].
Given the enormous historic experience with classic kites, regulators can have 
high confidence in domain expert-predicted safety.
Existing TA Operational Norms and FARs
Many existing FARs apply directly to TA or can be adapted. Part 101 contains 
"heirloom" seeds of many TA regs to come, but are overdue for upgrades to 
cover holes in safety and to allow for enhanced capabilities. Requiring 
certificated airworthiness substantially within current regs will prevent AWES 
R&D from inadvertently creating a menace.
It is proposed by the FAA that early operational AWES operate under 14 CFR 
part 77 Obstruction regs such as govern Antenna Farms, but this model is partial. 
For example, an antenna-farm Obstruction is also regulated under mast & 
tower structural and electrical codes outside the purview of the FAA. Towers 
lack many inherent hazards related to aircraft airworthiness & a potential to 
crash far afield (runaway). An AWECS is not a tower & needs to comply 
with Airworthiness Standards.
AeroTowing and Banner-Towing Precedents
Legacy TA will persist under existing FARs. A constant exchange of technology 
will occur with new types of TA, and many of the old rules will still apply.
Aerotowing continues as a major method of launching gliders and as a design option 
for certain situations. An active world record category involves towing as many 
gliders as possible from one tow-plane. Utility towing of cargo and passengers 
might make a comeback in the future due to economic or practical considerations.
Traditional Banner Towing Operations continue to evolve by incremental hardware 
and operational improvements. New types are emerging; for example, the lifting 
of mega-flags by helicopter.
Draft FAA sUAS Regs
AWES are UAS. sUAS rulemaking is proceeding and the FARs expanding accordingly. 
Draft rules call for a PIC and VO crew. A misconception in the AWE field is that 
autonomous operations will be permissible in a short time-frame. The safer bet is 
that many years must pass before the required Airworthiness is validated and 
Certificated, and that UAS and sUAS PIC/VO rules will apply.
Parts 101 and 77 
PART 101 - MOORED BALLOONS, KITES, UNMANNED ROCKETS 
AND UNMANNED FREE BALLOONS
Part 101 sections below are still being edited for brevity. 
The existing Kite, Moored Balloon, and Unmanned Free Balloon Regs are partial 
models for Tethered Free-Flight. Not that Part 101 is being rapidly superseded 
by new FAA AWES Guidelines.
Part 101 applies to any kite that weighs more than 5 pounds intended to be 
flown at the end of a rope or cable...including a gyroglider attached to a 
vehicle on the surface of the earth is considered to be a kite. No person may 
conduct operations that require a deviation from this part except under a 
certificate of waiver. No person may operate a moored balloon, kite,... in a 
prohibited or restricted area unless he has permission from the using or 
controlling agency, as appropriate.
101.7 covers "Hazardous operations" and has a key catch-all clause- 
"No person may operate any moored balloon, kite,... in a manner that creates 
a hazard to other persons, or their property." It goes on to assert "No person 
operating any moored balloon, kite,... may allow an object to be dropped 
therefrom, if such action creates a hazard to other persons or their property." 
The next subparts apply to the operation of moored balloons and kites. A person 
operating a moored balloon or kite within a restricted area must comply only 
with 101.19 and with additional limitations imposed by the using or controlling 
agency, as appropriate. 
101.13 Operating limitations. (a) Except as provided in paragraph (b) next, no 
person may operate a moored balloon or kite- (1) Less than 500 feet from cloud 
base; (2) More than 500 feet above the surface of the earth; (3) From an area where 
surface visibility is less than three miles; or (4) Within five miles of the 
boundary of any airport. (b) Paragraph (a) of this section does not apply to the 
operation of a balloon or kite below the top of any structure and within 250 feet 
of it, if that shielded operation does not obscure any lighting on the structure.
101.15 Notice requirements. No person may operate an unshielded moored balloon 
or kite more than 150 feet above the surface of the earth unless, at least 24 hours
before beginning the operation, he gives the following information to the FAA ATC 
facility that is nearest to the place of intended operation: (a) Names and addresses 
of owners and operators. (b) The size of the balloon or the size and weight of the 
kite. (c) The location of the operation. (d) The height above the surface of the 
earth at which the balloon or kite is to be operated. (e) The date, time, and 
duration of the operation.
[The above continues to be a workable system for certain small simple low-risk 
AWES R&D, say by a school youth team.] 
101.17 Lighting and marking requirements. (a) No person may operate a moored balloon or 
kite, between sunset and sunrise unless the balloon or kite, and its mooring lines, are 
lighted so as to give a visual warning equal to that required for obstructions to air 
navigation in the FAA publication "Obstruction Marking and Lighting".
(b) No person may operate a moored balloon or kite between sunrise and sunset unless 
mooring lines have colored pennants or streamers attached at not more than 50 foot 
intervals beginning 150 feet above the surface of the earth and visible for at least 
one mile.
[Conspicuity Comment- Three-mile visibility standard is proposed to supersede the one  
mile minimum, based on higher general aviation traffic and airspeeds and likely 
proliferation of AWES.]
101.19 Rapid deflation device. No person may operate a moored balloon unless it has 
a device that will automatically and rapidly deflate the balloon if it escapes from
its moorings. If the device does not function properly, the operator shall immediately 
notify the nearest ATC facility of the location and time of the escape and the estimated 
flight path of the balloon.
[A Kite-Killer operational model] 
Subpart D - Unmanned Free Balloon Operations 101.31 A person operating an 
unmanned free balloon within a restricted area must comply only with 101.33 (d) and 
(e) and with any additional limitations that are imposed by the using or controlling
agency, as appropriate. 
101.33 Operating limitations. No person may operate an unmanned free balloon- 
(a) Unless otherwise authorized by ATC, in a control zone below 2,000 feet 
above the surface, or in an airport traffic area; (b) At any altitude 
where there are clouds or obscuring phenomena of more than five-tenths coverage; 
(c) ... where the horizontal visibility is less than five miles; 
(d) During the first 1,000 feet of ascent, over a congested area of a city, town, 
or settlement or an open-air assembly of persons not associated with the operation; 
or (e) In such a manner that impact of the balloon, or part thereof including its 
payload, with the surface creates a hazard to persons or property not associated 
with the operation.
[More model specification of "Kite Killers" following the free balloon model-] 
(a) No person may operate an unmanned free balloon unless- (1) It is equipped 
with at least two payload cut-down systems or devices that operate independently 
of each other; (2) At least two methods, systems, devices, or combinations thereof, 
that function independently of each other, are employed for terminating the flight 
of the balloon envelope; and (3) The balloon envelope is equipped with a radar 
reflective device(s) or material that will present an echo to surface radar 
operating in the 200 MHz to 2700 MHz frequency range. The operator shall activate 
the appropriate devices required by paragraphs (a) (1) and (2) of this section when 
weather conditions are less than those prescribed, for operation under this subpart, 
or if a malfunction or any other reason makes the further operation hazardous to 
other air traffic or to persons and property on the surface. 
(b) No person may 
operate an unmanned free balloon below 60,000 feet standard pressure altitude 
between sunset and sunrise (as corrected to the altitude of operation) unless 
the balloon, attachments, and payload, whether or not they become separated during 
the operation, are equipped with lights that are visible for at least 5 miles and 
have a flash frequency of at least 40, and not more than 100, cycles per minute. 
(c) No person may operate an unmanned free balloon equipped with a trailing 
antenna that requires an impact force of more than 50 pounds to break it at any 
point, unless the antenna has colored pennants or streamers that are attached at 
not more than 50 foot intervals and that are visible for at least one mile.
[The standard above suggests a 50lb breaking-strength metric for partial exemption 
of minor single kitelines]
 
(d) No person may operate between sunrise and sunset an unmanned free balloon 
that is equipped with a suspension device (other than a highly conspicuously colored 
open parachute) more than 50 feet along, unless the suspension device is colored in
alternate bands of high conspicuity colors or has colored pennants or streamers 
attached which are visible for at least one mile. 
101.37 Notice requirements. (a) Prelaunch notice : Except as provided in 
paragraph (b) of this section, no person may operate an unmanned free balloon 
unless, within 6 to 24 hours before the operation, he gives the following 
information to the FAA ATC facility nearest to the place of intended operation: 
(1) The balloon identification. (2) The estimated date and time of launching, 
amended as necessary to remain within plus or minus 30 minutes. (3) Location 
of the launching site. (4) The cruising altitude. (5) The forecast trajectory and 
estimated time to cruising altitude... (6) The length and diameter of the balloon, 
length of the suspension device, weight of the payload, and length of the trailing 
antenna. (7) The duration of flight. (8) The forecast time and location of impact 
with the surface of the earth...
 
101.39 Balloon position reports. [This general procedure is suited to 
realtime BreakAway Emergencies] a) Each person operating an unmanned free 
balloon shall: (1) Unless ATC requires otherwise, monitor the course of the 
balloon and record its position at least every two hours; and (2) Forward 
any balloon position reports requested by ATC. (b) One hour before beginning 
descent, each person operating an unmanned free balloon shall forward to the 
nearest FAA ATC facility the following information regarding the balloon: (1) 
The current geographical position. (2) The altitude. (4) The forecast trajectory 
for the balance of the flight. (5) The forecast time and location of impact with 
the surface of the earth. (c) If a balloon position report is not recorded for any 
two-hour period of flight, the person operating an unmanned free balloon shall 
immediately notify the nearest FAA ATC facility. The notice shall include the last 
recorded position and any revision of the forecast trajectory. The nearest FAA ATC 
facility shall be notified immediately when balloon tracking is re-established. 
(d) Each person operating an unmanned free balloon shall notify the nearest FAA 
ATC facility when the operation is ended.
14 CFR Part 77 - OBJECTS AFFECTING NAVIGABLE AIRSPACE
The FAA has provisionally ruled-
"Persons proposing to conduct temporary airborne testing of AWES for data collection 
purposes must provide notice to the FAA pursuant to 14 CFR 77.13(a)(1), requiring 
notice of any construction or alternation of more than 200 feet above ground level."
This notice is not interpreted to preclude current allowable operations of TA, 
such as Tow-Launch of Gliders, Banner-Towing, Hobbyist Kiting, etc., which can 
serve as surrogate data sources, unless the study compounds risk.
Nor is AWES testing seen to be prohibited under 200ft, provided the key rule 
of Part 101 is met- "No person may operate any moored balloon, kite,
... in a manner that creates a hazard to other persons, or their property."
FAA can make the following determinations- No Objection, Conditional 
Determination, and Objectionable. Obstructions are identified by conflicts 
with "Imaginary Surfaces" partitioning airspace, particularly in proximity 
to Airports.
Other 14 CFR Parts 
The FAA regulates skydiving activity under "Parachute Operations" Part 105 
(14 CFR 105). Flight operations for skydiving are conducted under Part 91 
"General Operating and Flight Rules" (14 CFR 91). 
FAA Advisory Circulars provide additional guidance about flight operations. 
Banner-Towing & Glider Aero-Towing regulations inform equivalent operations 
in other applications. 
Recreational NAS use covered by FAA Advisory Circular (AC) 91-57; generally 
limits operations to below 400 feet AGL well separated from airports and air 
traffic. This is the appropriate airspace for virtually all current AWE 
developers to conduct most experiments without constituting a menace. 
Three acceptable means of operating UASs in the NAS: 1) within “restricted 
airspace: or under a Special Airworthiness Certificate (2) Experimental Category 
or (3) Certificate of Waiver or Authorization (COA). A COA authorizes an operator 
to use defined airspace under specific provisions unique to the operation. It may 
require Visual Flight Rules (VFR) & operation only &/or during daylight. COAs 
are issued for a specified time period; one year typical. COAs require coordination 
with air traffic control & may require a transponder in certain types of airspace.
Mishap and Accident Reporting
Aviation safety historically depends on shared safety knowledge. Voluntary and 
enforced safety reporting is now well established.
 
It is essential that the pioneering TA/AWES community voluntarily report 
safety related mishaps and accidents according to existing aviation 
standards for such data. There is an unfortunate practice on the part of some 
commercial ventures to consider such information as private, but aviation 
safety shortcuts are not a true business advantage, and the unintended result 
may be loss of innocent life.
Failure of voluntary AWES Safety Reporting will provoke mandatory standards.
Sense and Avoid Standard 
A sUAS's current inability to autonomously follow "sense and avoid" 
rules means a ground observer (PIC &/or VO) must maintain visual contact 
operating in unrestricted airspace. The PIC/VO should maintain aural vigilance 
in a quiet enough setting (no loud machinery) to detect airplane intrusion 
before visual spotting. "Sense & avoid" UASs requirement currently means a PIC 
and VO, plus dive or kite-kill capability. Possibility of special IFR Rules 
clearances, for example, a higher operational ceiling during graveyard shifts 
to help AWES bridge night-time surface inversion calm.
TA Daily Operations 
Tethered Aviation operations entail general and particular hazards. A tether 
is a vulnerable and dangerous obstacle extending almost invisibly over large 
distances. Conspicuity an established requirement. 
Weather is a key AWES parameter, with a close dependence on forecast 
conditions.
Filing daily NOTAM are an essential procedure in many airspace 
regions. PIREP are another messaging tool. Mayday is the most extreme 
instance reserved for immediate human peril. 
Separation, Avoidance, Visibility, & Education (SAVE) is a useful 
mnemonic for the basic principles of safe TA operations. S is for passive 
Separation; the relegation of TA operations to remote low-traffic airspace; 
A is for Avoidance; the effective evasive capability of a TA platform (ie. 
"kite-killers"). V for Visibility is the standard for obstruction markings, 
transponders, radar-reflectance, etc.. E for Education is the requirement to 
appropriately inform & train all pilots operating in proximity to TA, as 
well as the special Type-Rating knowledge a TA PIC needs.
Dense Arrays- Super Density Operations (SDO) 
A major class of TA is cross-linked wings in arrays. Such arrays are calculated 
to utilize airspace up to a hundred times more efficiently than single-line AWES.
The "tether-scope" requirement of single-line systems means they operate too 
sparsely to scale greatly,
Multiline Arrays also have key safety advantages over single line systems. 
Redundancy of tethers makes flyaway safely improbable. Land and airspace is 
conserved, minimizing obstruction issues. Conspicuity is greatly 
enhanced.
The 155lb UltraLight Vehicle Maximum is proposed as a Consensus 
Standard AWE wing unit maximum for large arrays. This allows for 
considerable power per unit (>100kW).
Formations of cross-linked soft wings, organized almost like a micro-chip 
and firing in metachrony, may be "the look". Such lattices may aggregate 
enough power to drive the largest ground-based generators; and even retrofit 
legacy power-plants (esp. Nukes), and as kite-hybrids (to throttle-back Gas 
and Coal Turbines).
Special AWES Sub-Classes
Many AWES concepts involve special unstandardized methods that will 
evolve into well-defined classes with consensus standards.
Some specific methods to note- Traction-Rotor, Wingmill, Varidrogue, 
Pilot-Kite, etc.
Future ACs will detail these specialty issues.

Hazard Mitigation
A hazard is defined in FAA Order 8040.4 as a "Condition, event, or 
circumstance that could lead to or contribute to an unplanned or 
undesirable event." Hazard Analysis is the process of indentifying 
hazards. Risk Assessment is the process of quantifying identified 
hazards.
Special TA Risks
A tether is a significant flying obstruction hazard requiring 
complete avoidance. Tether geometry and operational methods are unique 
features to account for, with useful similarity to standard geometry flight 
trajectories and special aviation operations like free-ballooning and skydiving.
Poor Conspicuance
Mid-Air Collisions- Tether trajectories and aerobatic patterns of fast 
moving AWE kiteplanes can catch a VFR pilot unawares, otherwise Mid-Airs are not 
an inherent hazard with high conspicuity AWES. Sense and Avoid is the 
Consensus AWEIA Standard. UAS must give way to all manned aircraft.
Sparse single-line arrays may distract encroaching pilot with one unit while 
another unit goes unoticed. Dense clustering of the units seems like a 
safer configuration.
MegaScaling
Kites are the largest aviation structures and the multiplication of 
powerful forces can make them inherently dangerous. The largest wing ever 
created was a 17,000sqft monster that caused a fatality within minutes 
of first flight [WKM].
Long tethers are megascale structure and caused power blackouts and stopped 
trains and steamships [WKM, DF]
 
Breakaway
Multi-Line Tether redundancy is the most basic precaution from Breakaway. 
If any line parts, remaining line ratings must exceed the new line break 
load-case.  
Breakaway of a passive kite from its anchor generally results in the kite 
gliding down to the surface in large circles. A kite circling down in wind 
generally lands 4x its altitude downwind from its breakaway point.
Tether Dragging is a most dangerous condition of a kite dragging its 
anchor or "junk" with enough resistance to sustain flight for an indefinite 
distance, possibly even for hundreds of miles. This hazard should be 
known and planned for by first-responders. A tether cut-away system can 
mitigate dragging hazard.
Flying Mass (Generators, etc.)
The fundamental determiner of flying generator risk is mass times impact 
velocity. Extra safety-criticality exists when the generator is also required 
to maintain flight by motoring. 
Niche concerns exist. The FAA discourages unpressurized Magnetos above 
14000ft, due to corona discharge "cross-firing". Cyclic high G-Loadings can 
cause generator windings to fail early by rubbing way insulation, especially 
operating near thermal limits.
Conductive Tethers
Electrical Hazards of many High-Voltage systems are well known and subject 
to well defined standards. AWES operations add dimensions of risk and 
complexity, but a rough consensus exists that the problems will be overcome 
by careful engineering. Electrocution risks must be virtually eliminated by 
a combination of proper design and sound operational practices.
The NEC is recommended as the baseline electrical code governing high voltage 
operations, and other NFPA codes for fire safety, as applicable.
Issues of concern include- Shorted Power Transmission, Equipment Fire, 
WildFire, Lightning, Structural mismatch (creep, mixed elastic modulus), 
Polymer composite Thermal Limits, Thermo-Resistive Runaway, Ground Contact 
during Flight Operation, Salt Environments. etc..
Weather Hazards to AWES
AWES operations must reliably adapt to meteorological extremes, 
anticipating fronts, storms, icing conditions, and so on.
Turbulence
A zoo of CAT, ECD, gustnados, virga, breaking gravity waves, etc. can 
potentially upset AWES flight.
Suitable control limits and load cases must be defined (especially by 
downward and rearward bursts).
Icing
Soft Kites have been shown to naturally shed ice (KiteLab Group). Rigid 
airframes will require landing in icing conditions, or standard deicing 
gear.
Snow
AWES will require means of coping with snow on a case-by-case basis. Buildup 
on wings during ground phases and site mobility are two obvious problem cases.
ESD
Kites and Moored balloons often experience extreme electrostatic charge 
(Saint Elmo's Fire). This Corona Discharge can affect electronics and burn 
semiconducting surfaces (like salt infused dielectric materials. This will be
an important hazard to validate solutions for.
Lightning
Lightning hazard is best assessed case-by-case, with normal considerations, 
and tether-specific risk. Conductive tethers present a potential path for 
lightning, and polymer tethers can melt, causing breakaway. Multiple 
dielectric tethers seem advantaged, but data is scant.
Hazardous Flight Dynamics
Aerobatic Operations are intentional flight dynamics covered elsewhere. 
Unintended inherently hazardous Flight Dynamics include Buffet, Divergence, 
Slack-Tether, Tether-Snub, Actuation Saturation, Surge loads.
Wireless Control Link Dependence  

Wireless control links are vulnerable to jamming and other failures and 
must be rigorously validated. GPS and other data systems cannot be 
exclusively depended on for flight. Default failsafe modes are needed 
for any communication failure.
Radar "Clutter" Concern 
The current air traffic control and civil defense system depends on 
legacy radar and it will take a decade or two before this reality 
changes.
Radar integration requirements and consensual best-standard is emerging; 
that an array or kite farm have at least one corner reflector in stable 
flight (not aerobatic) with a standard transponder. What the FAA seeks 
to prevent is sprawling clouds of fast moving clutter creating a hazard 
for existing aviation. Pilots are a powerful political force in airspace 
issues who also will not allow a degradation of safety standards.
"Decloaking"- Emergency radar reflectance upon breakaway to Free-Balloon 
standard;
Case- The SkySails Control Pod is a small radar target with a stealthy shape 
(no corner reflector surfaces) and would be fairly easy to coat with radar 
absorbing "blackball" paint. Of course, the parafoil itself is almost 
invisible to radar naturally, if the cloth sizing does not contain aluminum 
or other metallic ingredients.
Terminal Collision Avoidance System (TCAS)
TCAS III interrogates airborne radar beacon transponders and provides 
traffic advisories and resolution advisories in the vertical and 
horizontal planes to the pilot. 
NextGen Transponders
The FAA will require the majority of aircraft operating within the NAS 
to be equipped with some form of ADS-B Out by January 1, 2020, as part 
of NextGen implementation. ADS-B is also a basis for "self-separation" 
of AWES in overlapping operation, to reduce airspace sprawl.
Control Loss
Actuator Saturation is a working actuator, such as a control surface, so 
overpowered by extreme conditions as to be unable to effect a control outcome.
Improper Attitude of an aircraft is when it diverges from an intended 
orientation. In single tether dynamics, consistent attitude 
is inherently tricky to maintain, as compliance is high. On the other hand, 
multi-tethers "staked apart" can constrain attitude to a narrow range.
Fail-Safes
A human pilot is currently indispensable to identify and recover AWES system 
upsets. This requirement will only ease as progress in reliability and flight 
automation occurs.
Passive Stabilities are inherent aerodynamic design features that tend to 
stabilize the aircraft in the absence of any active control. They include 
Dihedral, Keel, Snowplow Stability (Wing sweep), Tail/Drogue, and Y-Bridling.
Low Sink-Rate- Floaty low-mass low-wingloading aircraft are favored in a 
control-loss case.
Aggregated Stability- Cross-linked formations can enjoy a statistical stability, 
a "safety in numbers" higher than with individual units. This is seen when 
many marginally stable kites (like Fighter Kites) are flown in branching trains; 
the collection of kites flies stably, while any single kite would soon crash.
Spread-Anchor Stability- AWES can be "staked-out" across a kite-field, using 
the ground itself for powerful pitch-roll-yaw stability. This spread stability 
principle also enables far denser airspace utilization. by reduced positional 
uncertainty.
Safety Suspension of Unstable Elements- A sedate stable airborne platform can 
host less stable high-performance units suspended underneath.
Back-Up Systems- Automated Ballistic Parachutes might perform "saves" of high-.
mass falling objects.
E-VTOL Concerns
Settling-Under-Power, Thermal Shut-Down, and Loss of Back-Up Power are 
some special design and operational concerns.
Rotor Concerns
Many Helicopter and Autogyro standards apply. A potential for snagging 
tethers with rotors is a design and operational concern.
Rope Drive Concerns
Moving cable power transmissions have dragging, cutting, and burning 
potential.
Site Concerns
Bases must cope with Storms, Hail, Ice, Lightning, Wildfire, and so on.
Nesting Birds and Mud Daubers (pitot tubes). Bird Droppings can degrade a 
wing's lift below minimum specs.
Security concerns range from random vandalism to targeted sabotage. 
The nature of a threat, the inherent risk of an operation, and applied 
counter-measures all figure.
First Responder Access
AWES operations shall provide for clear and safe first-responder field access. 
An approved responder plan shall be filed and maintained with local fire and 
medical authorities.
Communications with ATC
AWES will be subject to the same standards of radio communications as other 
air traffic in its airspace.
Developers shall be contactable by, and be ready to contact, ATC, in the event 
of an emergency. 
 
Mid-Air Collision Hazard
Airframe-to-Airframe, Airframe-to-Tether.
Bird-strike to a high speed AWES can endanger flight.
Safety Aloft (Kite-Based "Manlifting") 
"Manlifting", as human flight is called in classic kiting, has been a taboo activity 
in modern kiting since the tragic death of a a leading figure [Eideken]. Its pretty 
much the only strict rule the AKA has; its million-dollar-per-instance member insurance 
policy is void when kites are used for human flight. In the many new kite sports 
people are flying and dying. Instances of sustained manlifting should be regulated 
under manned piloting standards.
In other flight domains, such as paragliding, rigorous standards exist for tethered 
human flight (Tow Launch). A high standard of training and measures like a reserve 
parachute typify safe tethered human flight. Tethered human flight operations are 
consensually considered to be higher-risk, requiring a higher standard of airmanship.
Basic Safety Precautions for AWES
TA Design Defaults
In the absence of extended testing, pessimistic safety margins are advisable.
Owing to tether effects like chaotic flight surges and slack-jerk, an 8 to 1 calculated 
safety-margin over the working load-case covers surge loads to single-line structure. 
Multi-line structure can employ somewhat relaxed margins.
All line, webbing, and fabric work to Master Rigger's standards 
covers most kite-surge and line-wear. These margins are higher than conventional 
aircraft to account for EndurOps conditions.
No Personnel should "stand in the bight," that is to say, occupy a position where 
impact can occur with a parting anchor or mechanical fitting under high loading.
AWES Crashworthiness and Crash Resistance
Crashworthiness is an aviation standard related to crash survivability, and can 
be specially defined as the ability for the airborne platform to crash without harm 
to people, including operators and populations.
Crash Resistance is definable as the natural ability of a kite-like platform to 
"crash" in ordinary use, without harm to property or itself, and be able to 
"hop right back up". 
The primary design and operational challenge is to "delethalize" every aspect 
of an AWES, by integrated systems engineering. Testing is required to best establish 
the extent to which hazards exist and how they can be mitigated.
In general, rigid high-mass high velocity aircraft are less crashworthy or crash 
resistant than low-mass low-velocity platforms. like soft-kites.
Operational Safety
Multiple Lines are a basic AWES redundancy, and a natural feature of most 
multiple kite arrays. Preventer Lines are a key back-up tool. Kill Lines and 
Weak Links are traditional "fail-soft" methods.
As tethered aviation grows along with existing airspace congestion, the mid-air 
collision risk by tethers will grow, demanding special precautions. Capability 
for an AWECS to "sense and avoid" is the primary defense against an airspace 
intrusion, but with limited reliability, so other measures must provide 
redundant protection for the worst cases.
Personnel Protection
AWES begins as a hazardous pioneering field. Every effort should be made to 
eliminate or control workplace risk. Required worker precautions will range from 
simple protective gear like gloves and hook knives in the case of simple systems 
to armored vehicles, tunnels, and bunkers, in the case of high-mass high-velocity 
operations.
Ground Safety
Safety Aloft
A common requirement for "perpetual" flight of large AWES will be for human 
operators to be able to climb aloft for maintenance and repair operations.
Safety Nets, such as trapeze artists train with, are an option for some designs. 
Property and populations under an EndurOps AWES might also warrant protective 
netting.
A reserve Parachute can be apex-hung passively-ready over a gondola or person, for 
quickest inflation. Such a rig fills a key gap in the Death Zone between 10m and 
200m (minimally safe base-jump). Ballistic chute systems have a place in 
manned TA, but may entail too much weight and cost for economic energy aircraft.
Body Harness and Safety Tethering following industrial climbing or mountaineering 
practice. Helmet, gloves, conspicuous clothing, etc. as needed. Body Armor has a 
general protective effect. Cutters such as a Hook Knife or ax can be essential. 
A Life Jacket requirement exists over water. Clothing and accessories should be 
free of snags. Fire-Safety principles apply according to specific risk.
Reserve Parachute. Minimum altitude allows time to deploy the chute, but with 
considerable risk. High altitude makes a parachute jump routine, with automatic 
deployment devices available. 
Large stunt-fall Airbags and climbers' crash cushions may find some use. Its 
possible a large parafoil can serve as a track-to airbag for a freefalling 
"Sky Monkey". Special airbags or spring legs can make landing modules safer. 
Flying and Falling Hardware is a major hazard. Accidental dropping of any object 
should never occur. Dangerous droppable mass should be padded and multiply 
secured; by added Lanyards as needed for redundancy.
Protecting Recreational and General Aviation
Conspicuity and Pilot Awareness are primary protections. "Sense and Avoid" is 
a key capability. Operation in remote areas is favored. Air traffic in regular 
proximity to TA, may employ special precautions.
Some historic military aircraft had line cutters added, to cope 
with barrage-lines. This precaution will make a comeback around intensive
kite operations. Preventative design is to fair profiles, adding glide rails 
or stays to allow lines to slide past airframes. 
Helicopters are uniquely at risk from ordinary kite tethers, as they 
generally operate a low altitudes with a large unprotected rotor. 
Collective pitch links at the rotor hub are especially vulnerable to 
being "frozen" if wrapped-up in kite line. It may pay to protect rotor 
links from various kinds of lines by means of cutters based on sharp 
blades, abrasives, or resistive heat. Exhaust heat could protect 
against UHMWPE wraps, since its melting temp is low; on the other hand, 
a fire risk might result. Some helicopters already have partial cutter 
protection, a line cutting device on the top of the cabin, but there are 
other snag-points to protect, like crooks formed by landing skids.
Collisions with a low-mass low-tension tether can be gentle upon contact 
but progressive in action. A faired aircraft might brush-past without 
snagging, recovering attitude. In many future cases more risk may ensue 
from cutting a tether than letting a colliding aircraft hang in a tangle. 
It may be practical for a flight crew to escape or be rescued, and their 
ensnared aircraft recovered with only minor damage. Dramatic mishaps with 
happy endings could occur with Fail-Soft measures.
AWES Flight Operations
Launching and Landing are the riskiest routines in TA. Some system designs 
will call for high avoidance of frequent take-offs and landings [Joby Energy], 
and others will seek to eliminate all hazards, to enable frequent hops up and 
down. Aerial Assembly by docking units may be standard for certain large arrays. 
The docking aircraft may come form nearby airports, in some concepts [KLG].
Cascaded launching and landing sequences will be common {KLG].
AWES will vary operations according to wind conditions. Aerobatic systems will 
park in high wind [Makani Power], to limit surge. "Low tech" systems will furl 
or change sails as condition change [KLG].
Operation in IFR Conditions
It is presumed AWES will be validated to operate during IFR conditions: at 
night and during other low-visibility conditions. One advantage is that AWES 
will remain on station, and not be wandering in low-visibility.
Night Operations
AWES will seek to tap common LLJs that form over night-time surface inversions.
Marking lights will involve either power from the ground, power from primary FEGs, 
or power from dedicated RATs.
IFR AWES Window. During IFR Conditions AWES are shielded from vFR traffic.
While most safety considerations tend to restrict AWES operations, 
there are potential compensating factors. A major opportunity is to fly AWES
more freely during IFR conditions when such conditions result in an absence 
of air traffic (nighttime, low visibility, below IFR altitude minimums, and full 
ATC determinism.
sUAS Piloting Concern- Site noise can mask the noise of intruding air traffic 
from a PIC or VO. (An airplane is often heard before seen, helping 
"sense & avoid".). Distractions and loss of concentration are common risks.
AWES Ground Operations 
Preventive Maintenance. Simple preservation operations and replacement 
of small standard parts. These constant routines are usually supervised or 
performed by the PIC.
Airspace
14 CFR part 77 Obstruction regs are to apply to early AWES, limiting them to 
under 2000ft AGL. Unlike fixed obstructions, AWES must coordinate operations 
with ATC.
Class G Airspace, and its land footprint, is the general realm of AWES R&D and 
future Operations. FSDOs are the arbiters of allowable experiments, with a 
decentralized flexibility. AWE R&D can "shop-around" for a "best-fit" FSDO 
(generally remote low-traffic NAS regions).
Recreational and General Aviation is feeling squeezed from above by expansion 
of Class B airspace, and from below by man-made obstructions like masts and 
AWES [EAA]
Future airspace is being defined by NextGen. 
NOTAM & COAs allow pioneering AWE R & D to occur. Shielded operations is an 
option for AWES at suitable sites.
Case Note- Small Airports Hoping to Accommodate AWE R&D 
A growing list of small airports seek to host AWE R&D, to replace declining 
revenue from other activities. Discussions with airport administrators and 
their stakeholders (aviators, aero clubs, skydivers, etc.) reveal a prevailing 
conviction that AWE can coexist with general aviation, that the operational issues 
are manageable. The players are eager to validate the new applications [WOW Italy]. 
 
There will be many eager FBOs as word gets out. Those fields are favored that 
have a combination of good wind, low existing air traffic, and some specialization 
advantage, like tow-launching, banner-towing, or skydiving operations. 
Many airports have large open spaces beside runways, (but away from approaches), 
suitable for limited low altitude "killable" AWES arrays under the control of the 
airport administration. 
Airports with a crosswind runway have an interesting potential to host 
crosswind AWE generator vehicles on the idle runway. Operations could switch 
runways as the wind veers.
Suggestions for AWE R&D operations at small airports
The activity should be considered experimental, and suspended at any sign of 
trouble. 
Only small-scale low-mass low-velocity low-altitude AWE operations are currently 
suited to existing low-traffic small airport operations. Only low air-traffic 
remote airports, with full local pilot awareness, are suited for R&D.
AWES altitudes should be as low a 200ft, with high conspicuity (3 mile minimum). 
Aeronautics engineers and pilots should prepare or review the AWES design and 
site plan and help present it for regional FAA FSDO review and approval. Shop 
around for NAS regions with air low traffic and willing inspectors. 
Particular concern must be paid to not crowd airfield approaches and enroach on
the standard traffic pattern. Current FAA kite visibility standards are weak 
and should be exceeded. All local pilots should be fully informed of operations.
AWECS operations must have a Pilot In Command (PIC) (plus often a Visual 
Observer (VO)) able to quickly douse the kites (kite-killers) at first sign of 
trouble, especially in case of another aircraft's landing or take-off emergency 
(FAA Sense and Avoid requirement). The PIC or VO must monitor radio traffic. 
All incidents and mishaps should be reported and investigated, with solutions
identified.
NOTAM can be daily filed (or equivalent airman awareness, like charted 
obstructions), just as skydiving and hot-air balloon operations do. Shared 
operations require education, coordinating, and briefing all the conventional 
users. Small FBOs and remote airspace tend to host an easily-informed close 
community of users.
Dynamic AWE power loads and surges must be buffered or isolated from airport 
electrical systems.
ETOPS Model for AWE EndurOps
AWES requires long-term flight persistence. The required endurance is 
unprecedented, ranging into thousands of hours between inspections and 
overhauls. A new operational category of EndurOps is proposed, with 
ETOPS as a model aspirational standard. ETOPS began as a specific standard 
for long transport flights over water or remote from an emergency landing 
field. 
A similar standard is needed to address intensive field operations of AWES. 
The rationale is that many technical issues are identical or similar. for 
aircraft expected to run for long periods unassisted, with aircraft that 
must not fail over water or far from airports. Many of the standards for 
redundancy and reliability will apply. 
Airframe and engine combined must meet basic ETOPS requirements for type 
certification. ETOPS operational certification involves special engineering 
and flight crew procedures on top of normal engineering and flight procedures. 
Pilots and engineering staff must be ETOPS qualified and trained. Operators 
with extensive long distance flight experience may be awarded ETOPS 
operational approval immediately, others must demonstrate ability 
through a series of ETOPS proving flights. Regulators monitor ETOPS 
performance of both type certificate holders and affiliate airlines. Any 
technical incidents during an ETOPS flight must be recorded. From data, 
the reliability of particular airframe-engine combination is measured 
and results published. EndurOps will be similarly validated. 

Inspections
Current aircraft are constantly preflight inspected by its crew and frequently 
spot inspected by qualified maintenance. They undergo significant and major 
inspections on an ongoing basis. 
In the absence of standards for extreme high-duty (high flight hours) of infrequently 
inspected AWES Aircraft, current standards must apply. Exception should only be 
made case-by-case where risk has been mitigated, for example, remote operations 
away from populations, with minimal personnel exposure to risk.
Production Approval Holder. A holder of a production certificate (PC), 
an approved production inspection system (APIS), a parts manufacturer approval 
(PMA), or a technical standard order (TSO) authorization who controls the design 
and quality of a product or part thereof.
Designated Engineering Representative (DER). An individual appointed 
in accordance with § 183.29 who holds an engineering degree or equivalent, 
possesses technical knowledge and experience, and meets the qualification 
requirements of this order.
Conformity Inspection of Prototype Products and Related Parts. An 
inspection to determine the applicant’s compliance to 14 CFR part 21, 
Certification Procedures for Products and Parts, § 21.33(b) and any other 
inspections necessary to determine that the prototype products and related parts 
conform to the proposed design drawings and specifications.
Conformity Inspection of Production Products and Related Parts. An 
inspection that may be necessary to determine that completed production products 
and related parts conform to the approved type design and are in a condition for 
safe operation. 
Case Example- Routine, ramp, intermediate, and major checks monitor transport 
fleets. Routine checks involve dozens of tasks listed by check headings. Constant ramp 
checks are more thorough every 10 days to 1 month, hanger checks occur every 3 
months, interchecks every 15 months, and major checks every 24000 flying 
hours. Hanger checks put an aircraft out of service for 24 hours, interchecks 10 
days, major checks 5 weeks. Source- AZoM.com
Insurability and Legal Liability
As aviation in shared airspace, TA operations must carry Liability Insurance 
proportional to risk. A wrongful death these days can cost ten million dollars in 
liability and easily kill a culpable (or related) aviation business that then 
becomes commercially uninsurable. 
AWES insurance is currently unavailable from traditional providers, so an 
industry supported self-insurance pool may be needed to jumpstart liability 
coverage availability. Secondary coverage, like Hull Insurance, awaits market 
maturation. The insurability guaranteed by an excise endowed fund can ensure that a 
financially weak AWE player in a freak-accident (unpredicted failure-mode) 
event does not leave victims or families uncompensated.
A path to early insurability will be via the aviation associations, who already 
offer members group-rate coverage, subject to applicable rules and conditions.
TA Regulatory Compliance 
Aviation safety is the professional cost of AWE sharing the sky. No serious AWES 
player can advance by bucking aviation safety culture. To lead the AWES industry 
in safety compliance is a clear competitive advantage. Aviation operators are 
civilly liable to third parties for negligence and recklessness quite apart from 
what aviation regs say. Criminal law applies to willful law violations or gross 
negligence resulting in harm to third parties.
DOE/NREL Input
Director Fort Felker's 2010 NREL presentation, Engineering Challenges To Airborne 
Wind Technology, deserves close study and is an excellent foundation for the AWE 
Industry to build on. The following are notes and commentary to the work, 
preparatory to TACO integration. Where Fort's terms are super-specialized or 
non-standard, they are recast for clarity. Comparison with the original 
document can sort out which ideas are Fort's, and which are appended.
Fort asserts the well-known attractions of AWE but focuses on the widely 
overlooked challenges. He consistently emphasizes that all system reliability 
requirements must be "explicitly defined" and early on warns that aviation 
"reliability is expensive", which particularly relates to complex aircraft 
costing roughly "500 dollars a pound". Some way to slash costs close to 
"five dollars a pound" must be found. The AWES string and rag KIS school 
seems closest to this high affordability.
Integrated Risk Management is a key part of the general Systems Engineering. 
A "rigorous risk reduction process" is called for. Fort covers many uncertainties, 
like who decides to recover after an automated shut-down. The Design Load 
Case-base to simulate and test must be exhaustive, including common Extreme 
Events like ECD- extreme coherent wind speed and wind direction change load cases 
(especially downward and rearward bursts).
 
Partial Failure Cases include Structural, Electrical, and Control System Faults. 
Fort cites the structural Engineering Safety Margin of conventional aircraft, but 
AWES operational extremes may require the higher standards of special utility and 
aerobatic types. The Design Environment is the chosen operating environment 
state-space, like if the system is to be operated in specific extreme weather 
conditions. Many kinds of special factors apply, like operations offshore or 
around populations.
Life Cycle Cost Modeling is another facet of Systems Engineering. Fort breaks this 
down as Development Cost, Manufacturing and Deployment Cost, Financing Cost, O&M 
Cost, Replacement Cost, and Decommissioning Cost. Land Cost should be added; 
systems with an extravagant land-need per installed-watt are disadvantaged.
Design and Verification Standards are carefully considered. Existing standards 
from wind energy and aviation are proposed for adoption as practical, but specific 
new "Certification Standards are urgently needed"; they do not yet exist. Due 
Diligence remains problematic until the new standards are in place. Third Party 
Validation is the essential finishing step to design verification.
Fort is not alone in predicting that AWES will "grow in size and become more 
flexible." Larger more flexible systems eventually means soft lattices of large 
soft (or smaller stick) kites, as the scale limits of single kiteplanes become 
restrictive.
Comprehensive component and field testing gets the greatest emphasis by Fort. 
Elsewhere he has opined that ARPA-E should be testing a "balanced portfolio" 
of AWES contenders. He especially advocates Highly Accelerated Life Tests (HALT). 
HALT will be the main job of many developer teams, with extended testing undertaken 
in highly adverse conditions, not just in ideal conditions. Even so, tens of 
thousands of flight hours are required to fully inform us.
Simulation Tools is another area Fort finds lacking in essential capabilities and 
validation. Fatigue Analysis over the design life is a requirement. 
Aero-Servo-Elastics is a frontier topic- the capacity of a system's own actuation 
to trigger flutter under specific conditions and the damping required to avoid 
divergence. Even simulation input data must be validated.
Fort echoes a hard reality, that "development of control systems for aircraft has 
become a long expensive process." A few standard control methods and issues are listed, 
but this is a big topic, especially for non-piloted systems. Environmental and Human 
Impact Assessment is mentioned not so much as daunting than as a necessary task.. Fort 
repeats calls in open circles for collaboration across the industry to resolve common 
problems.
Over a year has passed since Fort laid out these challenges. The AWES R&D community is 
committed to resolve them (AWES Forum). ARPA-E has been formally requested to apply 
Fort's "DOE/NREL Principles" to MakaniPower's contract testing and analysis 
work-product. 
Every R&D team is advised to follow Fort's admirable template as well.
Engineering Challenges of Airborne Wind Technology (Presentation)
www.nrel.gov/wind/pdfs/49409.pdf 
AWES Structural Load-Case Analysis 
Large scale tether and membrane AWES have special structural characteristics, 
and associated operational methods, involving diverse engineering fields.
Ground Anchors are a critical component of many TA classes. Civil engineering 
and associated soil geology figure in tethered flight regulation.  
Load cases with time steps are used in dynamic analysis. Each load case has a 
set of forces, moments and nodal deflections. In natural frequency (modal) 
analysis each load case presents a mode shape and frequency. This is highly 
specialized work in the case of complex systems with stiff composites, but data 
can also be generated by extended field testing, especially with simple systems.
AWES Service Life
It is generally supposed that stiff composite airframes may someday dominate AWE, 
Owing to exceptional performance. This can only occur as safety and reliability allows, 
as the system must be insurable and survive long enough achieve capital pay-back. The 
current preponderance of fabric-based designs reflects an initial advantage in safety 
and robustness. Slow low-mass soft-wings can "crash" and recover immediately 
without "Hull Loss".
Properly designed rigid  airframes do have fatigue issues, particularly in high G 
aerobatic and hard landing cycling, but should give a decade of more of service life. 
Soft wing skins will not last so long, although the load-path structure life may 
rival solid wing lifetimes, with skin renewed periodically. Fabric covered aircraft 
do remain airworthy for up to a decade or so, even tied-down outdoors. 
A recent estimate of kite fabric life comes from one of kiting's greatest engineer, Peter 
Lynn (Sr.), who had initially thought that rigid AWE wings were advantaged in service 
life until he bench and flight tested Dominco Goo's paraglider and kite fabric after 
14 months exposure to New Zealand UV and gales, and found it still fit for use.
This is consistent with KiteLab's independent study; the secret is polyurethane sizing with 
anti-UV additive. Kite fabric is paper-thin, but a composite wing is like a five-hundred 
page book. Hybrid schemes above allow composite wings in the high-speed crosswind role 
(though "racing parafoils" might be good enough). Existing airplane fabric uses aluminum 
or titanium based pigment for UV resistance.
Ground facilities can be essential permanent, with anchors, winches, generators, and 
so forth, lasting many decades in service. Ground-based equipment is built heavier, and 
is cheaper and easier to maintain. Issues like actuation saturation v. flying weight is 
less of a concern.
Environmental Impacts of AWES
NIMBY Noise and Visual Issues
Sound emanating from above travels farther with less attenuation than surface 
noise. Atmospheric layers can channel sound long distances. Acoustic interference 
and lensing effects often cause sound peaks to occur remote from a source.
AWES turbines on resonant composite wings tend to be noisy (Makani Power), sounding 
like an engine or high-speed machinery. Slower large scale oscillating wings can 
create "booming" and infrasound noise pollution. This noise can range from 
"washing machine" to "ocean wave". Noise issues with AWE can be judged by extending 
existing test point standards of AWEA.
Visual Impacts of AWES will be mixed. Opinion will vary over esthetics and there 
will be specific concerns, such as distraction to motorists. In general, high 
altitude operations will have a reduced direct visual impact, but over a wider area.
Wake Effect CAT
Wake turbulence in the form of compact wing-tip vortices will extend for a 
considerable distance downwind from individual large high-performance tethered 
wings. Larger less concentrated "mountain wave" turbulence will be caused by 
aggregated farms. The airspace and aerodynamic efficiency of a Kite Farm is 
limited by internal wake effects; farm scaling is sensitive to wake issues.
Long-term Megascale Impacts
Weather and Climate Effects
Just as condensation trails and CO2 emissions by existing aviation are increasingly 
considered environmentally significant, it will be recognized that large-scale 
AWES operations will have consequential atmospheric impacts, like rain 
shadows and peaks around large kite farms much as terrain causes.
 
Early Kite Farms will cause only micrometeorological effects, but long term 
meso- and mega-scale geoengineering impacts may range from catastrophic 
to existing ecosystems, to geoengineered mitigation of climate change or natural 
disasters[KLG].
Wildlife Issues
Birds (and bats*) have a primordial right to airspace, but can present a 
hazard to human aviation and are themselves at risk by activities like 
conventional wind power generation, night lit towers, etc.. The 
problems are increasingly well known and mitigation is an ongoing 
process. AWES design can mostly build on existing bird management 
practices, adding new protocols as needed. 
Migratory species in transit are most vulnerable to disturbances, but 
follow fairly predictable seasonal patterns, helping risk mitigation. 
Conventional windfarms can cause wholesale slaughter of flocks, 
so regulations are emerging to curb seasonal risk. Sense-and-Avoid 
capability of AWE systems might serve to give clearance to migrating 
formations. Sense-and-Warn (bird scaring) might also work, but is an 
open study. 
The presence of endangered bird species or high bird populations raise 
the urgency of bird issues. Nesting birds can be stressed by looming 
kites, acting out predator response behaviors. In extreme cases birds 
will abandon active nests, but in other cases birds adapt to kites 
and even seem to exploit some operations as defensive cover. Generally 
year-around birds exposed to kite operations adapt well, fully habituating, 
showing no stress response. Birds that first encounter kites can react by 
fight-or-flight response. Hawk kites scare birds away and 
might be a useful management tool, but birds are intelligent and often 
learn to ignore an empty threat. Young birds can act quite different to the 
same cues than their more experienced parents. Flying birds are most 
common near the surface and become rare with altitude, with few exceptions 
(like migrating snow geese over high mountains). AWE at higher altitude 
therefore seems more bird friendly that wind towers. A tendency exists for 
many birds to shun a looming flying object, a prey predation response. 
Its possible that any intensive wind energy operations change bird 
species distribution of their area. Towers are known useful to raptors, 
and turbine killed birds can attract scavengers. AWE has the potential 
to reduce such changes compared to tower farms. AWECS and other aerial 
structure should be minimally visible to birds even at night, by white 
markings. Black or dark red markings by day usually give the farthest 
warning to air traffic for easy avoidance. 
Conspicuity can reduce or increase air hazards to birds. Nav lights  
intended to warn pilots of night proximity can confuse migrators. 
Turbines that make noise and have red painted tips to delineate the disk area
better warn birds of an impact hazard. Fast-moving lines are a special hazard, 
potentially acting as a saw. Painting alternate black (or red) and white marking 
on moving line could help by making the motion visible. Fog has disoriented 
migrating birds, which sometimes cue on artificial lights, like radio mast 
warning lights.
A proposed farm method is to radar-detect airtraffic and only then activate 
warning signals. Another idea is to create clear migration corridors, 
well chosen gaps in the wind farm pattern, for birds to follow. The design of an 
AWECS can range from benign to deadly to birds. Where bird issues are most 
sensitive, the slower, softer, more visible systems are favored. Although direct 
data is scant, its probable that fast moving kiteplanes flying aerobatically 
constitute the same sort of hazard to birds as large conventional turbines. 
Many birds seem to have a hard time detecting or understanding the threat of a 
large fast-moving object on a highly curved trajectory, but do better avoiding 
an aircraft on a set course. Birds easily see and avoid large slow moving 
tethers and kites, with no known mortality factor. Birds often do not see the 
fine lines on toy kites and collide with them, usually with no bad effect, 
although a small potential for injury exists. Classic kiting is bird friendly, 
with the exception of fighter kites with cutting line. Some South Asian 
traditions even regulate the kite-fighting season based on bird presence. 
Fallen line must always be collected to avoid snaring wildlife. The risks are 
two-way. A bird strike can bring down almost any airplane by varied damage. 
Engines can be damaged enough to stop. Control surfaces, pitot 
tubes, cameras, antennas, etc. can be made inoperable. A kiteplane is 
subject to bird-strike risk, it can be blinded, brought down or breakaway, 
creating risk off-field. 
Bird study is a part of AWE site assessment. Baseline bird presence should be 
determined before a kite farm is established and bird presence tracked for 
ongoing impact detection and mitigation. Qualified independent biologists 
should be relied on to develop flexible management plans to meet high standards. 
AWE and birds will seemingly coexist well, but its up to designers, planners, 
and operators to make sure adverse impacts are minimal. 
*Bats are presumed to resemble birds in their general relation to AWE, but with 
a more nocturnal presence.
HazMat
Wind power has reduced issues with pollution. Modest concerns include toxic 
materials (E-Waste), operations like airframe washing, and improper system 
decommissioning. Decommissioning should be by design, with maximal 
recycling. Soft-kites with shorter service live should be fully recyclable.
A crash of a complex modern aircraft system can leave a large debris field requiring 
a meticulous clean-up to appropriate environmental standards. Ablation of fabric 
particles from aloft may be an issue with poorly formulated kite materials in 
high-duty service. Equipment fire can have high toxicity to fire fighters. 
Mass manufacturing should ideally be low impact.

Nextgen Integration 
Iterative-spiral toward NextGen-
  Input from all TA stakeholders and review by NextGen planners.
  Addressing of Concerns. Identification of Solutions.
  Technical Validation by Field-Testing. 
  Sign-off by stakeholders. 
  Adoption into NextGen ConOps.
 
AWES NextGen standards
NextGen Network Integration- Positioning, Navigation, Timing (PNT) Services; 
RealTime Community Of Interest (COI) utility; Layered Adaptive Security (LAS)- 
TAO will be a fully integrated sector. PIC comm linked.
Service Performance-Based Operations
Load On-Demand; it will be the goal of the AWECS to respond to load demand with 
LAS. Weather-Based Decision-Making- An Essential TAO function. 
Trajectory-Based Operations (TBO)- Variable geometry kitefarm operations 
will be certified. 
Super-Density Operations (SDO)- Airspace will be treated as a limited resource 
best maximized by AWE SDO well separated from air traffic.
 
Autonomous Flight under NextGen
Supervisory Override of Semi-Automated Flight is a bridge technology 
NextGen's Moving Constrained Airspace is a capability needed for Tethered 
Free-Flight development EVFR rules for relaxed visibility will widen the 
TA flight envelope & be a bridge to Autonomous IFR. 
NASA-FAA Research Transition Teams - JPDO Presentation
Federal Governance Issues
TA as whole is a new basis for an expanded sustainable aviation. AWE is potentially 
a world revolution in abundant renewable energy. The US FAA has a key global 
leadership role as the de-facto international aviation standard-setting body. The DOE 
also has a global leadership opportunity in AWES. Policy makers can maximise the 
opportunity by strong prompt positive action. The concern is sometimes heard that the 
FAA and/or DOE will play an obstructionist role in AWE development, but this is 
contrary to the legal mandates on these US Agencies.
NREL Director, Fort Felker, has called for the Federal Government to develop a 
"balanced portfolio" of AWE R&D support.
A hot-button AWES issue identified is the concept of airspace privatization. There 
seems to be a strong consensus in aviation circles to maintain airspace as a shared 
commons.
Currently Restricted Airspace, especially if underutilized, should be evaluated for 
AWES High Altitude R&D availability.
Mass job creation is a potential policy outcome of supporting AWES development. AWES 
operations are predicted to require workers at about the intensity of nuclear power 
plants (~300 workers per 
gigawatt).
AWE Excise Taxes and User Fees 
AWE taps airspace as a source of vast energy. Energy markets pay excise taxes; 
5% of a producer's selling price is typical. Unlike non-renewable energy sources, 
which eventually run out, renewables can generate excise revenue in perpetuity. 
Barriers to broad AWE societal stakeholder acceptance, like NIMBY 
(not-in-my-back-yard) forces, will melt before a rich new tax base that more 
than offsets any negatives. The average citizen who does not fly or own aircraft 
still shares a birthright to the airspace commons. An equitable AWE Excise Tax 
can make a huge contribution to basic social welfare & a new era of sustainable 
prosperity for all.
Airspace access by international legal tradition is a Public Commons based on the 
doctrine of Freedom-of-the-Seas. There is stiff resistance by existing aviation 
stakeholders to privatization of NAS as some venture-capital AWE stakeholders 
propose. Utility-scale AWE operations can contribute to shared airspace by paying 
Excise Taxes on energy extracted & maybe even special Airspace User Fees. 
Airspace User Fees are an unpopular idea to aviation practitioners. The AWE 
industry can thus earn aviation stakeholder acceptance by subsidizing common 
airspace infrastructure benefiting all. AWE tax revenue can offset existing FAA 
costs, relieving the overall Federal budget, pay for NextGen infrastructure, 
guarantee liability performance, and fund publicly-shared AWE R & D. The early 
industry needs a phase-in period for taxes, to promote initial risk investment and 
growth. As a mature AWE revenue-base develops, and airspace becomes widely 
impacted, a new excise tax base can be established. Small-scale personal AWE 
operating at low altitudes would be exempted commercial taxes.

Standards Enforcement
Due to wide publicity, many naive unqualified aspirants are attracted to AWE. 
TACO recommends a forebearant yet vigilant attitude on the part of authorities. 
Aspirants should be guided into appropriate aviation associations, and only be 
sanctioned in cases of gross recklessness.
In return, aviation associations must bear a responsibility to enforce and 
maintain the highest safety and legal standards.
K-Prize Standards
ARPA-E has announced a possible prize competition for AWE (aka "K-Prize"). AWEIA's 
advisory board holds that such a contest should apply key standards, including FAI 
Sporting Code rules, US FARs, and basic insurability, in order to ensure the safest 
possible event. Additionally, engineering data should result, consistent with needs 
identified by Fort Felker (DOE/NREL).
Land-Use Issues
Concerns include land-use loss from "no go" safety zones, and sprawl, in the case 
of early sparse AWES design configurations. Designs must be as inherently safe and 
and use as little and and airspace as possible. 
Opportunities exist for synergistic compatible use. A kite-farm might make 
windpower over a biofuel crop like hay or a methane-producing landfill unsuited to 
other reuses. Degraded land might slowly self-restore under low-impact AWES.
The ultimate outcome will be safe practical low-impact operations over dense 
populations.
Case Analysis- Land and Airspace Sprawl
In many cases a single-line AWES on a full-scope field will be acceptable, but for 
large-scale power, large farms will be required, and maximal utilization of scarce 
land and airspace will be essential. In the absence of direct experience, analytical 
geometric thought experiments offer some predictions. The following "gedanken" case 
is based on a Makani Power M-1 wing concept "fly-off" against a KiteLab Group dense 
array concept:
Suppose a large enough fleet of airliner-sized single-line AWES kiteplanes, each 
rated at a couple of megawatts, to power a major city of 1-5 gigawatts load. The 
city would need roughly one to five thousand large complex aircraft each occupying 
about a half square mile of "no-go" space, for a sprawling land footprint of 500-2500 
square miles. This many aircraft would make that city a host for aviation activity 
two to six times more intense than Heathrow, the world's current busiest airport. 
A 50sq m reference wing occupies a crosswind-projected reserved airspace of 500,000sq m 
(1km x 1/2km). This is only a 1/10,000 "solidity" factor, so its not surprising the 
little wing cannot sweep up very much of the energy flowing thru its space. 
A ballpark estimate is that the best soft wings are roughly 10 times the area of rigid 
wings by equivalent power (especially by leaving generators, conductors, etc. on the 
ground). Dense cross-linked arrays may be able to do about 100 times better, in power 
by land or airspace usage, than single tether electric kiteplanes. 
KiteLab suggests a handy operational scale for soft array wings of about 100sq m; 
five such soft wings roughly match a high L/D 50 sq m wing. One hundred such wings 
can be arched together across the same airspace, with plenty of spacing to avoid 
interference drag. Each of these wings can lift a high L/D airfoil of 50sqm to be held 
semi-captive in the latticework, looping crosswind in close proximity to its neighbors, 
but constrained by the matrix from collisions. 
So now the array has airliner-equivalent wings in passively constrained sweeping 
unencumbered by generators, actuators, battery back-ups, avionics, etc.. Cleaner and 
lighter, they develop more power. 
The dense array concept agrees with Prof. John Dabiri's findings (Biolocomotion Lab, 
Caltech) where a ten-fold increase in wind power extraction was demonstrated, by unit land 
area, by crowding many more slower turbines in the same spac, as compared with conventional 
wind farms. In the case of AWE, the added vertical dimension exponentially allows another 
tenfold gain in calculated potential. Thus dense cross-linked arrays seem able to do about 
100 times better, in power by land or airspace usage, than single tether electric kiteplanes.
The 15,000sq m projected airspace area then has a reasonable solidity of about 1/30. A large 
city now only needs 5-25sq miles of land footprint with dense kite arrays, 1/100th of the 
single-line AWES reference model. 
The challenges to the dense hybrid array approach are mostly operational, its truly 
heroic sailing in the sky. Kites are handled by simple traditional means of furling 
lines, sleeves, and packs. The entire array is piloted as one "metakite/megakite" 
from powerful ground winches to drive the largest class of generators. Large machinery 
runs many decades with just routine maintenance. This scheme creates many kite-flying jobs. 
A labor force comparable to nuclear power (with its elaborate safety and security needs) 
is needed, of about one worker per two or three MW. Jobs are an urgent societal need, 
like clean energy, for a win-win dynamic. A golden age of sky sailing can be a bridge 
to eventual fusion or space-based solar power.
Low-tech arrays do not require waiting decades or spending billions for complex aerospace 
perfection. 
Single-line AWES geometry makes scant use of the total energy 
in its required airspace. In some prototype videos the kiteplane 
is so hard to see, lost in a wide loop, that presenters resort to a 
laser-pointer to pick it out. Over 99% of the calculated energy in 
the required airspace goes untapped by the single line approach. 
The land footprint of single line systems also sprawling. Some proposed 
single-megawatt AWECS will require a field about 4000ft wide! Due to safety 
issues of high-mass high-speed aircraft, the field and airspace must be kept 
clear of populations or outside air traffic. An array interconnect network of 
roads and buried cables for this sort of AWECS is similarly extensive and 
expensive. Tens of square miles would be needed to serve a city. Such schemes 
face high barriers in shared air and land use markets.
OffShore AWES
Sea-based AWES have specific attractions, including less impact on the NAS. But the 
sea is a hostile environment, with its own daunting engineering challenges.
Boats are in many ways ideally flexible for "kite-sailing" operations, and there 
will be lots of shared functionality with land operations. Just as seaplanes are 
a major branch of aviation, TA will have a strong amphibious sector.
Gigawatt Scale AWES Concepts
TUDelft, with its Laddermill concepts and Kitegen its Carousel, have many years 
of study in gigawatt-scale AWES concepts. KiteLab Group proposes megascale 
AWES with many anchors and fully cross-linked formations of kites. These concepts 
offer economy-of-scale in using the largest ground-based generators. Some legacy 
powerplants will even be suited fro retrofitting as kite-hybrids.
Decommissioned nuke plants could be reworked as AWES sites, with the restricted 
airspace used as the new generation basis. 
Dr. Fagiano {Turin Polytechnic] has begun to study AWES airspace efficiency. All 
teams and investigators should carefully examine this issue. The winners in the 
AWE  engineering race will be determined by a handful of critical design issues 
like safety and maximal space use.
AWES Documentation
FAR documentation norms cover AWES UAS needs. A Special Airworthiness Certificate 
in the Experimental Category is the certification currently available to civil 
operators of UAS.
Existing aircraft certifications can be partially applied in cases of repurposing 
as AWES devices.
Part 77 certification requirements now apply to ongoing AWES Operations.
AIM 
AIM is the FAA's official guide to basic flight information and ATC procedures. It 
covers NAS, pilot human factors, flight safety, ATC glossary, and safety, accident, 
and hazard reporting info. AIM re-states and expands FARs in ten chapters:
It is proposed that chapters 3 and 5 contain specific amendments regarding AWE 
operations, and that eventually a chapter be included defining general TA or specific 
AWES operations, as the category matures. 
AIM 3-4-6. Alert areas are depicted on aeronautical charts to inform nonparticipating 
pilots of areas that may contain a high volume of pilot training or unusual type of 
aerial activity, to particularly alert pilots flying in these areas. All activity 
within an alert area shall be conducted in accordance with CFRs, without waiver, and 
pilots of participating aircraft as well as pilots transiting the area shall be 
equally responsible for collision avoidance. 
AIM 3-4-7. Controlled Firing Areas CFAs contain activities which, if not conducted in 
a controlled environment, could be hazardous to nonparticipating aircraft. The 
distinguishing feature of the CFA, as compared to other special use airspace, is that 
activities are suspended immediately when spotter aircraft, radar, or ground lookout 
(PIC/VO) indicate an aircraft might be approaching the area. There is no need to chart 
CFAs as they do not cause a nonparticipating aircraft to change flight path.
A statement of compliance (SOC) is a signed statement made by the AWES 
manufacturer stating that the unmanned aircraft system (specific by serial 
number) was designed, manufactured to applicable consensus standards, 
and is supported by monitoring and correction of safety-of-flight within a 
continued airworthiness system.
Configuration, Maintenance, and Procedures (CMP) Document is an approval 
by the FAA with minimum configuration, operating, and maintenance 
requirements, hardware life-limits. The Master Minimum Equipment List 
(MMEL) constraints necessary for an aircraft system to meet ETOPS level 
design approval requirements.
FAA certification offices provide airworthiness certification or related 
approval: Manufacturing Inspection District Office (MIDO), Manufacturing 
Inspection Satellite Office (MISO), Flight Standards District Office (FSDO), 
International Field Office (IFO), Certificate Management Office (CMO), or 
CertificateManagement Unit (CMU).
Production Approval Holder. A holder of a production certificate (PC), 
an approved production inspection system (APIS), a parts manufacturer approval 
(PMA), or a technical standard order (TSO) authorization who controls the design 
and quality of a product or part thereof.
Prototype and Production Manufacturing Standards 
Conformity Inspection of Prototype Products and Related Parts. An inspection 
to determine the applicant’s compliance to 14 CFR part 21, Certification 
Procedures for Products and Parts, § 21.33(b) and any other inspections 
necessary to determine that the prototype products and related parts conform to 
the proposed design drawings and specifications. 
Conformity Inspection of Production Products and Related Parts. An inspection 
that may be necessary to determine that completed production products and 
related parts conform to the approved type design and are in a condition for 
safe operation.
Designated Airworthiness Representative (DAR) is a maintenance of manufacturing 
worker appointed in accordance with § 183.33, who holds a mechanic’s 
certificate with an airframe and powerplant (A&P) rating under 14 CFR part 
65, Certification: Airmen Other Than Flight Crew-members, or a person who holds 
a repairman certificate and is employed at a repair station certificated under 
14 CFR part 145, Repair Stations, and who meets qualification requirements 
of this order. In manufacturing a DAR is appointed in accordance with § 183.33, who 
must possesses specific aeronautical knowledge and experience, and meets the 
qualification requirements of the order. 

-----------------------------
Acknowledgements: Special Thanks to Capt. David Harold Guinn (United, Ret.) for an 
Airman's perspective, to Dave Lang, for scientific-engineering mentoring, to Mark 
Moore and Dave North (NASA-LaRC), for first suggesting the need for an AWES ConOps, 
and to John Oyebanji (AWEIA-President Pro-tem) for authorizing this work as an AWEIA 
public commitment. WKM and DF also provided key encouragement and support, as the 
leading historical and scientific research organizations in classic kiting.
Thanks to the many individuals who helped, and to the many to come, as future 
versions evolve. It is hoped TACO saves lives while accelerating progress in AWE.
-----------------------------
For those seeking a fuller knowledge of AWE, Joe Faust maintains comprehensive 
archives and links at-
                www.energykitesystems.net
==============================
CoolIP- Creative-Commons Share-Alike Non-Commercial Rights Reserved